Triac_control_circuit_using_an_ECG776_zero_voltage_switch_IC

Published:2009/7/21 4:48:00 Author:Jessie | From:SeekIC

Triac control circuit using an ECG776 zero voltage switch IC. Resistor R2 must be the external sensor for the internal short and open protection to be operative. Select the triac from the ECG5600 series for the particular application (courtesy GTE Sylvania Incorporated).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/Switch_Control/Triac_control_circuit_using_an_ECG776_zero_voltage_switch_IC.html

Print this Page | Comments | Reading(3)