WINDSHIELD_WIPER_CONTROL

Published:2009/6/24 4:22:00 Author:May | From:SeekIC

Here's a good way to set windshield wipers on an interval circuit. Only two connections to the car's wiper control, plus ground, are required. Variable control can be accomplished by substituting a 500 K pot in series with a100 K fixed resistor in place of the 560 K.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/WINDSHIELD_WIPER_CONTROL.html

Print this Page | Comments | Reading(3)