Dual_high_side_switch_driver_with_extended_voltage_range

Published:2009/7/24 5:34:00 Author:Jessie | From:SeekIC

Figure 8-49 shows an LTC1155 connected as a switch driver for voltages greater than 9 V. The circuit is the same as that shown in Fig. 8-48, with the addition of the zeners. LINEAR TECHNOLOGY, APPLICATION NOTE 53, P. 2.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Electrical_Equipment_Circuit/Dual_high_side_switch_driver_with_extended_voltage_range.html

Print this Page | Comments | Reading(3)