Low-power consumption AC flashing light circuit diagram

Published:2011/10/26 21:49:00 Author:May | Keyword: Low-power consumption , AC flashing light | From:SeekIC

It uses the charging and discharging characteristic of capacitor C and the negative resistance characteristic of triode V under the breakdown condition to constitute a squegger oscillator. After getting power, 220V alternating current is half-wave rectified by diode D, current limited by resistor R to charge for C. When C's both sides voltage rises to V's breakdown voltage ( the actual value is approximately 9V), then it rapidly discharges by V to make the LED connected in discharging loop illuminate. After the discharging ended, V regains the closure condition, C starts to charge and to be redundant the above process. V has the synchronized signal which added to base to trigger the avalanche. Electric circuit working actual value is only 0.17mA.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Electrical_Equipment_Circuit/Low_power_consumption_AC_flashing_light_circuit_diagram.html

Print this Page | Comments | Reading(3)