NATIONAL_SEMICONDUCTOR

Published:2009/6/24 4:05:00 Author:Jessie | From:SeekIC

A circuit for use with grounded thermocouples is shown. To trim, short out the LM329B and ad-just R5 so that V°= αT, where cc is the Seebeck coefficient of the thermocouple and T is the absolute temperature. Remove the short and adjust R4 so that W equals the thermocouple output voltage at ambient. A good grounding system is essential here, for any ground differential will appear in series with the thermocouple output.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Electrical_Equipment_Circuit/Telephone-Related_Circuit/NATIONAL_SEMICONDUCTOR.html

Print this Page | Comments | Reading(3)