10_MHz_UNIVERSAL_COUNTER

Published:2009/6/28 21:48:00 Author:May | From:SeekIC

Circuit NotesThis is a minimum component complete Universal Counter. It can use input frequencies up to 10 MHz at INPUT A and 2 MHz at INPUT B. If the signal at INPUT A has a very low duty cycle, it may be necessary to use a 74121 monostable multivibrator or similar circuit to stretch the input pulse width to be able to guarantee that it is at least 50 ns in duration.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/LED_and_Light_Circuit/10_MHz_UNIVERSAL_COUNTER.html

Print this Page | Comments | Reading(3)