POLICE LIGHTS Circuit

Published:2013/3/5 0:33:00 Author:Ecco | Keyword: POLICE LIGHTS | From:SeekIC

This circuit uses a 555 timer which is setup to both runn in an Astable operating mode. This generates a continuous output via Pin 3 in the form of a square wave. When the timer's output changes to a high state this triggers the a cycle on the 4017 4017 decade counter telling it to output the next sequential output high. The outputs of the 4017 are connected to the LEDs turning them on and off.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/LED_and_Light_Circuit/POLICE_LIGHTS_Circuit.html

Print this Page | Comments | Reading(3)