Published:2012/9/9 20:30:00 Author:Ecco | Keyword: Water Flowing, in Pipe, Indicator | From:SeekIC
The vibrations associated with water flowing through a pipe are picked up by an inexpensive piezoelectric wafer. The signal from the wafer is first boosted by a micropower transistor amplifier and then fed to an ultra low power voltage comparator. When the vibration signal has sufficient amplitude, a FET transistor switch is activated. Drawing only 6uA, the whole circuit is powered by a lithium coin battery, which should power the circuit for many years.
Source: discovercircuits
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/LED_and_Light_Circuit/Water_Flowing_in_Pipe_Indicator____July_6_2009.html
Print this Page | Comments | Reading(3)
Code: