LED_CURRENT_INDICATOR_CIRCUITS

Published:2009/7/16 2:56:00 Author:Jessie | From:SeekIC

Here are some ways to connect an LED as an indicator that a load is receiving current: with the LED alone (A), with a resistor in series (B), with a resistor in series and one in parallel (C), and with two diodes in parallel (D).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Measuring_and_Test_Circuit/LED_CURRENT_INDICATOR_CIRCUITS.html

Print this Page | Comments | Reading(3)