PHASE_SEQUENCE_DETECTOR

Published:2009/7/5 23:11:00 Author:May | From:SeekIC

This circuit prevents damage to the load due to incorrect phasing. The three power SSR's are only permitted to turn-on for a phase sequence of phase A leading phase B. If phase A lags phase B the input currents will cancel, causing the SCR and the inhibit SSR to remain off until the sequence is reversed. The inhibit SSR is included to maintain isolation at the input.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Measuring_and_Test_Circuit/PHASE_SEQUENCE_DETECTOR.html

Print this Page | Comments | Reading(3)