THUMBWHEEL_PROGRAMMABLE_INTERVAL_TIMER

Published:2009/6/29 2:06:00 Author:May | From:SeekIC

Switch programmable on/off or interval timer, has three relay-switched outputs. 0ut-put one is active for the duration of time 1, output two is active for the duration of time 2, and output three is active for the duration of both one and two. Timing data is input through 6 BCD-encoded thumbwheel switches. Three SPST switches inform the WD-55 to interpret this data as NNN seconds. NNN seconds, NNN minutes, or NNN hours. The LED display will show the time remaining and the countdown when operating. Since the data is input through switches, the display may be deleted. Also, since the timing information is read from switches, the data is nonvolatile and no battery backup is required.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Measuring_and_Test_Circuit/THUMBWHEEL_PROGRAMMABLE_INTERVAL_TIMER.html

Print this Page | Comments | Reading(3)