Published:2011/6/21 20:30:00 Author:TaoXi | Keyword: 220V, AC, 600V, DC, switch, power supply | From:SeekIC
The high voltage boost power circuit: the 220V AC changed into the 600V DC switch power supply circuit.
Specifications:
Input voltage=220VacĀ±10%50/60Hz
Output voltage=0~600Vdc 0.25A
Switch frequency: 70~100kHz
Design guidelines:
In the DCM mode, the output power is 200W
The degradation situation continuous current mode calculation formula of the input RMS current is:
If the best operating duty ratio is set to D=0.35, the calculation formula of the input peak current is:
So the voltage detection voltage level limit of the FAN7554 is 1.5V.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/220V_AC_changed_into_the_600V_DC_switch_power_supply_circuit.html
Print this Page | Comments | Reading(3)
Code: