24v to 12v converter

Published:2013/3/18 4:16:00 Author:Ecco | Keyword: 24v to 12v, converter | From:SeekIC

As shown, the 24v to 12v converter circuit is nothing more than an integrated adjustable voltage regulator that acts on a group of power transistors in parallel. These transistors can be said to perform heavy duty while the regulator responsible for controlling them. Where 24 v input connector of the battery. 12V connector is the output and Gnd connector must be grounded. Of course, all the components (transistors and integrated) should be given with good heat dissipation and electrically insulated from the metal. 24v to 12v converter Adjustment : Place the pot 10 k Ω at its maximum (fully open or 10 k Ω) and connect to the dc to dc converter output a lamp 12V / 50W. At the input connect the battery in series so the voltage is reached 24V. Place the output in parallel with the lamp tester a continuous scale with the right completion (around 50V). Begin to turn the potentiometer until the brightness of lights and tester showed 12V.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/24v_to_12v_converter.html

Print this Page | Comments | Reading(3)