90_V_voltage_regulator_that_uses_a_PUT

Published:2009/7/22 4:17:00 Author:Jessie | From:SeekIC

This circuit shows a PUT that is used to control a voltage regulator. Figure 9-28B shows a plot of output voltage and conduction angle versus input voltage for the regulator. The output voltage is set by R4.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/90_V_voltage_regulator_that_uses_a_PUT.html

Print this Page | Comments | Reading(3)