Negative_voltage_regulator_using_an_ECG923_or_ECG923D_precision_regulator_IC

Published:2009/7/20 6:06:00 Author:Jessie | From:SeekIC

Negative voltage regulator (15 volts) using an ECG923 or ECG923D precision regulator IC. For metal can applications, where Vz is required, an external 6.2-volt zener should be connected in series with the regulated output. R1 is 3.65 ohms and R2 is 11.5 ohms for a ±5% fixed output (courtesy GTE Sylvania Incorporated).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/Negative_voltage_regulator_using_an_ECG923_or_ECG923D_precision_regulator_IC.html

Print this Page | Comments | Reading(3)