REMOTE_CONTROL_TRANSMIITER

Published:2009/6/17 22:49:00 Author:May | From:SeekIC

This transmitter sends an FM signal in the 88-to 108-MHz range, with a tone of 19 kHz. This can be used to activate the FM MPX pilot carrier indicator, which can be interfaced to external devices. L4 is for use with a 15 CM wire antenna. L1 is 9 turns of #26 enamelled wire on a 1/4-W 10-kΩ resistor (carbon type), L2 is 2 turns wound over L1. L3 is 7 turns of #26 enamelled wire on a 10-kΩ 1/4-W resistor.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Remote_Control_Circuit/REMOTE_CONTROL_TRANSMIITER.html

Print this Page | Comments | Reading(3)