AM_FM_IF_amplifier_for_455_kHz_and_107_MHz_using_an_ECG1054_14_pin_DIP

Published:2009/7/20 2:20:00 Author:Jessie | From:SeekIC

AM/FM IF amplifier for 455 kHz and 10.7 MHz using an ECG1054 14-pin DIP. IF coils and transformers are all standard and can be purchased at Radio Shack. Supply voltage is 4 volts (courtesy GTE Sylvania Incorporated).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/AM_FM_IF_amplifier_for_455_kHz_and_107_MHz_using_an_ECG1054_14_pin_DIP.html

Print this Page | Comments | Reading(3)