Small FM Receiver Circuit

Published:2012/9/20 21:04:00 Author:Ecco | Keyword: Small , FM Receiver | From:SeekIC

This is the most simple fm radio receiver with good performances that works great even if the sensitivity is not too high. The working principle of this fm receiver may seem a little unusual. It is made of an oscillator (T2 and T3) that is synchronized with the received frequency of T1. This transistor works as a broadband preamplifier in VHF range.The oscillator is adjusted between 87 … 108 MHz with C5. Because of the synchronization, the oscillator output will have the same frequency deviation as the received signal from the fm antenna. This deviations are caused by the broadcasted audio informations. The frequency modulated signal show up on P1 + R5. Low pass filter R6/C6 extracts the audio signal and then is amplifier by T4 … T6 and transmitted at the output through C9 capacitor. FM Receiver Circuit Diagram The coil details are presented in the fm receiver circuit diagram. The radio receiver is adjusted on different stations with the help of C5. P1 potentiometer is adjusted untill the best reception is obtained. If we attach an audio amplifier and a speaker then this fm receiver can be made very compact as a pocket radio.? 72 Responses to “Small FM Receiver Circuit”



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/FM_Signal_Generating/Small_FM_Receiver_Circuit.html

Print this Page | Comments | Reading(3)