Power_function_generator_developing_sine_wavestriangular_waves_and_square_waves

Published:2009/7/20 22:13:00 Author:Jessie | From:SeekIC

Power function generator developing sine waves,triangular waves and square waves. Operating frequency is 2 hertz to 20 kilohertz. VO is up to ±25 volts (50 volts peak to peak) across loads as small as 10 ohms, which produces a maximum of 2.5 amperes of output current. All capacitor working voltage ratings should be 50 volts DC. All resistors should be the half-watt type unless otherwise specified. Keep the lead at pin 2 of the op amp less than 2 inches or oscillations will result. Full power output is only obtainable up to about 5 kilohertz due to the op amp (courtesy Intersil, Inc.).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Power_function_generator_developing_sine_wavestriangular_waves_and_square_waves.html

Print this Page | Comments | Reading(3)