Quartz_stabilized_bridge_oscillator_with_sine_wave_output

Published:2009/7/24 5:35:00 Author:Jessie | From:SeekIC

Figure-26 shows a crystal-controlled bridge-based oscillator, where one leg of the bridge is formed by a lamp(a classic circuit).Figure 4-27 shows the waveforms，As the oscillation amplitude builds, the lamp current increases, as does lamp resistance. This causes a reduction in gain, and the circuit finds a stable operating point, The 15-pF capacitor suppresses Spurious oscillation. The amplifier output(trace A, Fig，4-27)is a sine wave without about 1.5%distortion(trace B),caused primarily by common-mode swing，LINEAR TECHNOLOGY,APPLICATION NOTE 43,P. 28.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Quartz_stabilized_bridge_oscillator_with_sine_wave_output.html

Print this Page | Comments | Reading(3)