AD8066ARZ

The AD8066ARZ is one member of the AD8066 series.The AD8066 FastFET amplifiers are voltage feedback amplifiers with FET inputs offering high performance and ease of use.The AD8066 is a dual amplifier.These amplifiers are developed in the Analog Devices, Inc. proprietary XFCB process and allow exceptionally low noise operation (7.0 nV/Hz and 0.6 fA/Hz) as well as very high input impedance.With a wide supply voltage range from 5 V to 24 V, the ability to operate on single supplies, and a bandwidth of 145 MHz, the AD8066 are designed to work in a variety of applications.For added versatility, the amplifiers also contain rail-to-rail outputs.

Features of the AD8066ARZ are:(1)FET input amplifier ; (2)1 pA input bias current ; (3)low cost ; (4)high speed: 145 MHz, -3 dB bandwidth (G = +1) ; (5)180 V/s slew rate (G = +2) ; (6)low noise :7 nV/Hz (f = 10 kHz) ,0.6 fA/Hz (f = 10 kHz) ; (7)wide supply voltage range: 5 V to 24 V ; (8)single-supply and rail-to-rail output ; (9)low offset voltage 1.5 mV maximum ; (10)high common-mode rejection ratio: -100 dB ; (11)excellent distortion specifications ; (12)SFDR -88 dBc @ 1 MHz ; (13)low power: 6.4 mA/amplifier typical supply current ; (14)no phase reversal ; (15)small packaging: SOIC-8, SOT-23-5, and MSOP-8.

The absolute maximum ratings of the AD8066ARZ can be summarized as:(1)supply voltage:26.4 V;(2)storage temperature range:-65 to +125;(3)operating temperature range:-40 to 85;(4)lead temperature range (soldering 10 sec):300°C;(5)differential input voltage:1.8V.Stresses above those listed under absolute maximum ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum ratings for extended periods may effect device reliability.The AD8066 is voltage feedback operational amplifier that combine a laser-trimmed JFET input stage with the Analog Devices eXtra Fast Complementary Bipolar (XFCB) process, resulting in an outstanding combination of precision and speed. The supply voltage range is from 5 V to 24 V.