MFG:AIC Package Cooled:SOP D/C:00+
MFG: AIC
Package Cooled: SOP
D/C: 00+
Description: The AIC1803 is designed to protect the lithiumion battery from damage or degrading the lifetime due to...
The AIC1803 is designed to protect the lithiumion battery from damage or degrading the lifetime due to overcharging, overdischarging and overcurrent for three-cell lithium-ion battery powered systems such as notebook PCs. It can also provide the cell-balancing "bleeding" function to automatically discharge the overcharged cell until the overcharge condition is released.
Safe and full utilization charging is ensured by the accurate ±30mV overcharge detection. Four different specification values for overcharge protection voltage are provided for various protection requirements. The very low standby current drains little current from the cell while in storage.
AIC1084
PDF/DataSheet Download
The AIC1803 is designed to protect the lithiumion battery from damage or degrading the lifetime due to overcharging, overdischarging and overcurrent for three-cell lithium-ion battery powered systems such as notebook PCs. AIC1803 can also provide the cell-ba...
The AIC1802 battery protection IC is designed to protect lithium-ion batteries from damage due to overcharging, overdischarging, and overcurrent for two series cells in portable phones and laptop computers. It can be a part of the low-cost charge control sys...
The AIC1784 fast charge controller IC is designed for intelligent charging of NiMH or NiCd batteries without the risk of overcharge. Detection (-0.25%), detection (peak voltage timer) and detection are the primary methods employed by the AIC1784 to terminate...
The AIC1783A fast charge controller IC is designed for intelligent charging of NiMH or NiCd batteries without the risk of overcharge. −V detection (-0.25%) and 0detection (peak voltage timer) are the primary methods employed by the AIC1783A to terminat...
The AIC1783 fast charge controller IC is designed for intelligent charging of NiMH or NiCd batteries without the risk of overcharge. -?V detection (-0.25%) and 0?V detection (peak voltage timer) are the primary methods employed by the AIC1783 to terminate fa...
The AIC1781B fast charge controller IC is designed for intelligent charging of NiMH or NiCd batteries without the risk of overcharge. DV Detection (-0.25%), 0DV detection (peak voltage timer) and DT/Dt detection are the primary methods employed by the AIC178...
Price: 1-100 USD
IGBT module, Overcurrent Limiting Function, 1200V, 100A, 780W
Price: 0.3-0.5 USD
optically coupled isolator, DIP, 5.3kV, All electrical parameters 100% tested, TLP521-4, Toshiba
Price: 0.0001-5 USD
DIP, 4-to-16 line, decoder/demultiplexer, high-speed, 3.5 pF, 13 ns
Price: 99-199 USD
24-Bit General Purpose Digital Signal Processor; Vcc: -0.3 to +7.0 V; Vin: VSS- 0.5 to Vcc + 0.5 V...
Price: 0.01-100 USD
large capacitance, aluminum electrolytic capacitor, 160 to 450Vdc, Non solvent-proof type, 680uF
Price: 2-3 USD
MCU ARM 128KB FLASH MEM 64-LQFP - STM32F103RBT6
Price: 16-38 USD
DSP controller, 132-QFP, -0.3V to 7V
Price: 69.9-74.5 USD
32-BIT, 1200 MHZ, MICROPROCESSOR, PBGA1088
Price: 0.033-0.05 USD
AF schottky diode, SOT-323, 30V
Price: 1.5-1.8 USD
IC DC/DC CONTRLR STP-UP 10-MSOP - LTC1700EMS#PBF
Price: 0.12-0.18 USD
BR24L16FJ-WE2, High Reliability Series EEPROMs, I2C BUS, Rohm, -0.3 to +6.5 V, 8-SOP
Price: 0.5-1 USD
schottky TTL programmable read-only memory, DIP, -0.5 to 7.0V, High speed
