Purchase AK93C95A, In-stock AK93C95A From SeekIC.
Part Number: AK93C95A
Description: The AK93C85A/95A/10A is a 16384/32768/65536-bit serial CMOS EEPROM divided into 1024/2048/4096 registers of 16 bits eac...
- Table of contents:
AK93C95A
-
Suppliers
DataSheet
General Description
AK93C95A General Description
The AK93C85A/95A/10A is a 16384/32768/65536-bit serial CMOS EEPROM divided into 1024/2048/4096 registers of 16 bits each. The AK93C85A/95A/10A has 4 instructions such as READ, WRITE, EWEN and EWDS. Those instructions control the AK93C85A/95A/10A.
The AK93C85A/95A/10A can operate full function under wide operating voltage range from 1.8V to 5.5V. The charge up circuit is integrated for high voltage generation that is used for write operation.
A serial interface of AK93C85A/95A/10A, consisting of chip select (CS), serial clock (SK), data-in (DI) and data-out (DO), can easily be controlled by popular microcontrollers or standard microprocessors.AK93C85A/95A/10A takes in the write data from data input pin (DI) to a register synchronously with rising edge of input pulse of serial clock pin (SK). And at read operation, AK93C85A/95A/10A takes out the read data from a register to data output pin (DO) synchronously with rising edge of SK.
The DO pin is usually in high impedance state. The DO pin outputs "L" or "H" in case of data output or Busy/Ready signal output.
Software controlled write protection
When Vcc is applied to the part, the part automatically powers up in the ERASE/WRITE Disable state. In the ERASE/WRITE disable state, execution of WRITE instruction is disabled. Before WRITE instruction is executed, EWEN instruction must be executed. The ERASE/WRITE enable state continues until EWDS instruction is executed or Vcc is removed from the part.
Execution of a read instruction is independent of both EWEN and EWDS instructions.
Busy/Ready status signal
After a write instruction, the DO output serves as a Busy/Ready status indicator. After the falling edge of the CS initiates the self-timed programming cycle, the DO indicates the Busy/Ready status of the chip if the CS is brought high after a minimum of 250ns (Tcs). DO=logical "0" indicates that programming is still in progress.DO=logical "1" indicates that the register at the address specified in the instruction has been written with the new data pattern contained in the instruction and the part is ready for a next instruction.
The Busy/Ready status indicator is only valid when CS is active (high). When CS is low, the DO output goes into a high impedance state.
The Busy/Ready signal outputs until a start bit (Logic"1") of the next instruction is given to the part.
AK93C95A Features
ADVANCED CMOS EEPROM TECHNOLOGY
READ/WRITE NON-VOLATILE MEMORY
WIDE VCC OPERATION Vcc = 1.8V 5.5V
AK93C85A 16384 bits, 1024 16 organization
AK93C95A 32768 bits, 2048 16 organization
AK93C10A 65536 bits, 4096 16 organization
SERIAL INTERFACE
Interfaces with popular microcontrollers and standard microprocessors
LOW POWER CONSUMPTION
0.4mA max. Read Operation
0.8A Max. Standby
HIGH RELIABILITY
Endurance : 100K cycles
Data Retention : 10 years
Automatic address increment (READ)
Automatic write cycle time-out with auto-ERASE (Max. 8ms : VCC=4.5V 5.5V)
Busy/Ready status signal
Software controlled write protection
IDEAL FOR LOW DENSITY DATA STORAGE
Low cost, space saving, 8-pin package
READ/WRITE NON-VOLATILE MEMORY
WIDE VCC OPERATION Vcc = 1.8V 5.5V
AK93C85A 16384 bits, 1024 16 organization
AK93C95A 32768 bits, 2048 16 organization
AK93C10A 65536 bits, 4096 16 organization
SERIAL INTERFACE
Interfaces with popular microcontrollers and standard microprocessors
LOW POWER CONSUMPTION
0.4mA max. Read Operation
0.8A Max. Standby
HIGH RELIABILITY
Endurance : 100K cycles
Data Retention : 10 years
Automatic address increment (READ)
Automatic write cycle time-out with auto-ERASE (Max. 8ms : VCC=4.5V 5.5V)
Busy/Ready status signal
Software controlled write protection
IDEAL FOR LOW DENSITY DATA STORAGE
Low cost, space saving, 8-pin package
AK93C95A Connection Diagram
AK93C95A
PDF/DataSheet Download
- Datasheet: AK93C95A
- File Size: 160231 KB
- Manufacturer: AKM [Asahi Kasei Microsystems]
- Click here to Download
- ·AK90GB40
- SANREX [SanRex Corporation]
- THYRISTOR MODULE
- 575001 KB
- ·AK90GB80
- SANREX [SanRex Corporation]
- THYRISTOR MODULE
- 575001 KB
- ·AK90HB120
- SANREX [SanRex Corporation]
- THYRISTOR MODULE
- 111210 KB
- ·AK90HB160
- SANREX [SanRex Corporation]
- THYRISTOR MODULE
- 111210 KB
- ·AK93C10A
- AKM [Asahi Kasei Microsystems]
- 16K / 32K / 64KBIT SERIAL CMOS EEPROM
- 160231 KB
- ·AK93C10AF
- AKM [Asahi Kasei Microsystems]
- 16K / 32K / 64KBIT SERIAL CMOS EEPROM
- 160231 KB
- ·AK93C41A
- AKM [Asahi Kasei Microsystems]
- 0.9V operation 1K / 2Kbit Serial CMOS EEPROM
- 126726 KB
- ·AK93C41AV
- AKM [Asahi Kasei Microsystems]
- 0.9V operation 1K / 2Kbit Serial CMOS EEPROM
- 126726 KB
AK93C95A Relative Products
AK93C85A
The AK93C85A/95A/10A is a 16384/32768/65536-bit serial CMOS EEPROM divided into 1024/2048/4096 registers of 16 bits each. The AK93C85A/95A/10A has 4 instructions such as READ, WRITE, EWEN and EWDS. Those instructions control the AK93C85A/95A/10A.The AK93C85A...
AK93C75B
The AK93C45B/55B/65B/75B is a 1024/2048/4096/8192-bit serial CMOS EEPROM divided into 64/128/256/512 registers of 16 bits each. The AK93C45B/55B/65B/75B has 4 instructions such as READ, WRITE, EWEN and EWDS. Those instructions control the AK93C45B/55B/65B/75...
AK93C75A
The AK93C45A/55A/65A/75A is a 1024/2048/4096/8192-bit serial CMOS EEPROM divided into 64/128/256/512 registers of 16 bits each.The AK93C45A/55A/65A/75A has 4 instructions such as READ, WRITE, EWEN and EWDS. Those instructions control the AK93C45A/55A/65A/75A...
AK93C65B
The AK93C45B/55B/65B/75B is a 1024/2048/4096/8192-bit serial CMOS EEPROM divided into 64/128/256/512 registers of 16 bits each. The AK93C45B/55B/65B/75B has 4 instructions such as READ, WRITE, EWEN and EWDS. Those instructions control the AK93C45B/55B/65B/75...
AK93C65AF-E2
The AK93C65AF-E2 is a kind of 4096-bit CMOS EEPROM divided into 256 registers of 16 bits each.AK93C65AF-E2 has four instructions such as READ, WRITE, EWEN and EWDS. It has a wide operating voltage range from 1.8 V to 5.5 V. The serial interface of the device...
AK93C65A
The AK93C45A/55A/65A/75A is a 1024/2048/4096/8192-bit serial CMOS EEPROM divided into 64/128/256/512 registers of 16 bits each.The AK93C45A/55A/65A/75A has 4 instructions such as READ, WRITE, EWEN and EWDS. Those instructions control the AK93C45A/55A/65A/75A...
Hotspot Suppliers Product
SiI161CTU
Price: 3-3.8 USD
SiI161CTU, TQFP-100, Silicon image
G6A-274P-ST-US-DC24V
Price: 0.8-1.8 USD
fullly sealed relay, high impulse withstand, digital circuit
28F400B5
Price: 3.2-4 USD
smart 5 boot block, flash memory, 44-Lead PSOP, –2.0V to +7.0V, ETOX Flash Technology
TPS73701DCQRG4
Price: 1-10000000 USD
1.0A, SOT223-6, linear low-dropout, voltage regulator , 2.2V to 5.5V
MT1828E
Price: 1-3.5 USD
Electric Conveyor Oven, QFP, MT1828E
STA326VJ
Price: 6.2-7 USD
2.1, high efficiency, digital audio system, I2C Control, Selectable De-emphasis, HSSOP36
PM20CHA060-5
Price: 12-16 USD
PM20CHA060-5, MITSUBISHI Electronics, IPM module
PGH15016AM
Price: 1-2 USD
PGH15016AM Nihon Inter Electronics Corporation
FF450R12ME3
Price: 10-300 USD
FF450R12ME3 Infineon Technologies IGBT Modules
TLE7469GV52
Price: 0.9-1.5 USD
monolithic integrated voltage regulator, HSOP12, microcontrollers
RM300HA-24F
Price: 1-1 USD
diode module, 1200 V, 300A
HEF4518BT
Price: 0.1-0.2 USD
Fully static operation, Standardized symmetrical output characteristics, SO16, 100mW, 50mA, counter
