CD22100

Features:

• Low ON Resistance . . . . . . . . . .75W (Typ) at V_DD = 12V
•"Built-In"Control Latches
• Large Analog Signal Capability. . . . . . . . . . . . . . . ±V_DD/2
• 10MHz Switch Bandwidth
• Matched Switch Characteristics R_ON = 18W (Typ) at V_DD = 12V
• High Linearity - 0.5% Distortion (Typ) at f = 1kHz, V_IN = 5V_P-P, V_DD = 10V, and R_L = 1kW
• Standard CMOS Noise Immunity
• 100% Tested for Maximum Quiescent Current at 20V


Pinout




Specifications

Supply Voltage (Referenced to VSS Terminal). . . . . . .-0.5 to 20V
Input Voltage (All Inputs) . . . . . . . . . . . . . . . . . -0.5 to V_DD 0.5V
Input Current (Any one input (Note 1)) . . . . . . . . . .. . . .±10mA
Power Dissipation
For T_A = -40 to 60 (Package Type E) . . . . . . . . . . .  . 500mW
For T_A = 60 to 85
(Package Type E) . . . . . . . . Derate Linearly 12mW/ to 200mW
For T_A = -55 to 100 (Package Type F) . . . . .  .. . . . . . 500mW
For T_A = 100 to 125
(Package Type F) . . . . . . .. . Derate Linearly 12mW/ to 200mW
Device Dissipation per Transmission Gate
For T_A = Full Package Temperature Range (All Types) . . . 100mW


Description

CD22100 combines a 4 x 4 array of crosspoints (transmission gates) with a 4-line to 16-line decoder and 16 latch circuits. Any one of the sixteen transmission gates (crosspoints) can be selected by applying the appropriate four line address. The selected CD22100 transmission gate can be turned on or off by applying a logic one or zero, respectively, to the data input and strobing the strobe input to a logic one. Any number of the transmission gates can be ON simultaneously. When the required operating power is applied to the CD22100, the states of the 16 switches are indeterminate. Therefore, all switches must be turned off by putting the strobe high and data in low, and then addressing all switches in succession.