Features: • Fast response time-20ns• Wide input differential voltage range-24V to ±15V supplies• Precision input stage-VOS = 1mV• Low input bias current-IB = 100nA• Low input offset current-IOS = 30nA• ±4.5V to ±18V supplies• Three-State TTL and CMOS compa...
EL2018: Features: • Fast response time-20ns• Wide input differential voltage range-24V to ±15V supplies• Precision input stage-VOS = 1mV• Low input bias current-IB = 100nA• Low...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
VS Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±18V
VIN Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +VS to -VS
VIN Differential Input Voltage . . . . Limited only by Power Supplies
IIN Input Current (Pins 1, 2 or 3) . . . . . . . . . . .. . . . . . . . . ±10mA
IINS Input Current (Pins 5 or 6) . . . . . . . . . . .. . . . . . . . . . . ±5mA
PD Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . .1.25W
IOP Peak Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
IO Continuous Output Current . . . . . . . . . . . . . . . . . .. . . . . 25mA
TA Operating Temperature Range . . . . . . . . . . . -40°C to +85°C
TJ Operating Junction Temperature
Plastic DIP Package . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 150°C
TST Storage Temperature . . . . . . . . . . . . . .. . . -65°C to +150°C
The maximum power dissipation depends on package type, ambient temperature and heat sinking. See the Typical Performance curves for more details.
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
The EL2018 represents a quantum leap forward in comparator speed, accuracy and functionality.
Manufactured with Elantec's proprietary Complementary Bipolar process, this device EL2018 uses fast PNP and NPN transistors in the signal path. A unique circuit design gives the inputs the ability to handle large common mode and differential mode signals, yet retain high speed and excellent accuracy. Careful design of the front end insures the part maintains speed and accuracy when operating with a mix of small and large signals. The three-state output stage is designed to be TTL compatible for any power supply combination, yet it draws a constant current and does not generate glitches. When the output is disabled, the supply current consumption drops by 50%, but the input stage and latch remain active.
Elantec facilities comply with MIL-I-45208A and other applicable quality specifications. For information on Elantec's processing, see QRA1: Elantec's Processing-Monolithic Products.