Position: Home  > All Categories> Integrated Circuits (ICs) > EM6152

EM6152

Features: ` Low quiescent current 135 A ` -40°C to +125°C temperature range ` Highly accurate 5 V, 400 mA guaranteed output (actual maximum current depends on power dissipation) ` Low dropout voltage, typically 250 mV at 250 mA ` Unregulated DC input can withstand -42 V reverse battery and +45 V p...

product image

EM6152 Picture
See larger image
SeekIC No. : 004335967 Detail

EM6152: Features: ` Low quiescent current 135 A ` -40°C to +125°C temperature range ` Highly accurate 5 V, 400 mA guaranteed output (actual maximum current depends on power dissipation) ` Low dropout voltag...

EM6152 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
EM6152
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/12/19

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

` Low quiescent current 135 A
` -40°C to +125°C temperature range
` Highly accurate 5 V, 400 mA guaranteed output (actual maximum current depends on power dissipation)
` Low dropout voltage, typically 250 mV at 250 mA
` Unregulated DC input can withstand -42 V reverse battery and +45 V power transients
` Fully operational for unregulated DC input voltage up to 40 V and regulated output voltage down to 3.0 V
` No reverse output current
` Very low temperature coefficient for the regulated output
` Current limiting
` Windowed watchdog with an adjustable time windows, guaranteeing a minimum time and a maximum time between software clearing of the watchdog
` Time base accuracy ±8% (at 100ms)
` Sleep mode function (V55)
` Adjustable threshold voltage using external resistors
`Adjustable power on reset (POR) delay using one external resistor
` Open-drain active-low RESET output
` Reset output guaranteed for regulated output voltagdown to 1.2 V
` System ENABLE output offers added security
` Qualified according to AEC-Q100
` Green SO-8 and PSOP2-16 packages (RoHS compliant)






Application

· Automotive systems
· Industrial
· Home security systems
· Telecom / Networking
· Computers
· Set top boxes





Pinout

Connection Diagram




Specifications


Parameter 		Symbol Conditions
Continuous voltage at INPUT
to VSS 		VINPUT -0.3 to +40V
Transients on INPUT for
t < 100 ms and duty cycle 1%		 VTRANS Up to +45V
Max. voltage at any signal pin VMAX VOUTPUT + 0.3V
Min. voltage at any signal pin VMIN VSS 0.3V
Reverse supply voltage on
INPUT 		VREV -42V
Storage temperature TSTO -65 to +150 °C
ESD
According to MIL-STD-883C
method 3015.7		 VSmax 2000V





Description

The EM6152 offers a high level of integration by combining voltage regulation, voltage monitoring and software monitoring using a windowed watchdog.
A comparator monitors the voltage applied at the VIN input comparing it with an internal voltage reference VREF. The power-on reset function is initialized after VIN reaches VREF and takes the reset output inactive after a delay TPOR depending on external resistance ROSC. The reset output goes active low when the VIN voltage is less than VREF. The RES and EN outputs are guaranteed to be in a correct state for a regulated output voltage as low as 1.2 V. The watchdog function monitors software cycle time and execution.
If software clears the watchdog too quickly (incorrect cycle time) or too slowly (incorrect execution) it will cause the system to be reset. For enhanced security, the watchdog must be serviced within an "open" time window. During the remaining time, the watchdog time window is "closed" and a reset will occur should a TCL pulse be received by the watchdog during this "closed" time window. The ratio of the open/closed window is either 33%/67% or 67%/33%.
The system ENABLE output prevents critical control functions being activated until software has successfully cleared the watchdog three times. Such a security could be used to prevent motor controls being energized on repeated resets of a faulty system.
When the microcontroller goes in stand-by mode or stops working, no signal is received on the TCL input of the EM6152 (version 55) and it goes into a stand-by mode in order to save power (CAN-bus sleep detector).
In EM6152, the voltage regulator has a low dropout voltage and a low quiescent current of 135 uA. The quiescent current increases only slightly in dropout prolonging battery life. Built-in protection includes a positive transient absorber for up to 45 V (load dump) and the ability to survive an unregulated input voltage of -42 V (reverse battery). The input may be connected to ground or to a reverse voltage without reverse current flowing from the output to the input.






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.