MFG:GENNJM Package Cooled:PLCC D/C:00+
MFG: GENNJM
Package Cooled: PLCC
D/C: 00+
Description: The GS9022A is a drop-in replacement for the GS9022 in existing applicationsThe GS9022A is a m...
The GS9022A is a drop-in replacement for the GS9022 in existing applications
The GS9022A is a monolithic bipolar integrated circuit designed to serialize SMPTE 125M and SMPTE 244M bit parallel digital signals as well as other 8 or 10 bit parallel formats. This device performs the functions of sync detection, parallel to serial conversion, data scrambling (using the X9 + X4+1 algorithm), 10x parallel clock multiplication and conversion of NRZ to NRZI serial data. The data rate is automatically set for SMPTE 259M data rates to 400 Mb/s. Other features include a lock detect output and an internal cable driver capable of driving two 75 loads.
The device requires a single +5 volt or -5 volt supply and typically consumes 650 mW of power while driving two 75 loads. The 28 pin PLCC packaging assures a small footprint for the complete encoder function.
| PARAMETER | VALUE/UNITS |
| Supply Voltage Input Voltage Range (any input) DC Input Current (any one input) Power Dissipation (VS = 5.25 V) Operating Temperature Range Storage Temperature Range Lead Temperature (soldering, 10 sec) |
5.5V -VEE<VI<VCC 10mA 910mW 0TA70 -65TS150 260 |
GS9000C
PDF/DataSheet Download
The GS9022 is a monolithic bipolar integrated circuit designed to serialize SMPTE 125M and SMPTE 244M bit parallel digital signals as well as other 8 or 10 bit parallel formats. GS9022 performs the functions of sync detection, parallel to serial conversion, ...
The GS9021A implements error detection and handling (EDH) according to SMPTE RP-165. Interfacing to the parallel inputs of either the GS9002, GS9022 or GS9032 serial digital encoders, the GS9021A is primarily used on the transmit end of the SDI interface. Th...
The GS9021 implements error detection and handling (EDH) according to SMPTE RP-165. Interfacing to the parallel inputs of either the GS9002, GS9022 or GS9032 serial digital encoders, the GS9021 is primarily used on the transmit end of the SDI interface. The ...
The GS9020A is specifically designed to deserialize SMPTE 259M serial digital signals. The inclusion of Error Detection and Handling (EDH) ensures the integrity of the data being received from the serial digital interface (SDI). Internal 75 termination resis...
The GS9020 is specifically designed to deserialize SMPTE 259M serial digital signals. The inclusion of Error Detection and Handling (EDH) ensures the integrity of the data being received from the serial digital interface (SDI). Internal 75Ω termination...
The GS9015B is a monolithic IC designed to receive SMPTE 259M serial digital video signals. This device performs the function of data and clock recovery. It interfaces directly with the GENLINX™ GS9000B or GS9000S Decoder. While there are no plans to d...
Price: 0.22-0.75 USD
Logic Level MOSFET, SOP, 30 V
Price: 1-2 USD
40x40x20 mm, MagLev Motor Fan, 12V, 0.12 A, Sunon, KDE1204PKVX
Price: 0.6-0.8 USD
linear hall-effect sensor, TO-92, 8 V, 4.5 V to 6 V Operation, Low-Noise Output
Price: 0.7-1.5 USD
Power MOSFET, 500 V, TO-247
Price: 0.38-0.4 USD
150mA, linear regulators, 1.8V, SOT-23-5, 0.1μF, Thermal Protection
Price: 150.75-190 USD
300GB, Ultra320 SCSI, Hot-Plug Hard Driver, 10K, Hewlett-Packard
Price: 4-4.5 USD
Low Loss DuoPack, IGBT, TO247, Low EMI, Low Gate Charge, Trench and Fieldstop technology, 1200V
Price: 0.47-1.09 USD
USB, RS-232 bridge controller, -0.3 to 6.0 V, 28 Pins SOIC package, 256 bytes buffer
Price: 0.9-1.2 USD
transistor inverter, DIP8, 20 mA, integrated photodetector
Price: 1-2 USD
CC1029, TO-247, APT
Price: 2-5 USD
off-line quasi-resonant flyback switching regulator, ZSIP5, -0.3 V to +6 V, 0.8 W
Price: 2-2.5 USD
Cold-Junction-Compensated, K-Thermocouple-to-Digital Converter, SOP8, -0.3V to +6V, Open Thermocou...
