Purchase GS9064, In-stock GS9064 From SeekIC.
MFG:GENNUM
Part Number: GS9064
MFG: GENNUM
Description: The GS9064 is a second-generation high-speed bipolar integrated circuit designed to equalize and resto...
- Table of contents:
GS9064
-
Suppliers
DataSheet
General Description
GS9064 General Description
The GS9064 is a second-generation high-speed bipolar integrated circuit designed to equalize and restore signals received over 75Ω co-axial cable at data rates from 143Mb/s up to 540Mb/s. The GS9064 is designed to support SMPTE 344M and SMPTE 259M and is optimized for performance at 270Mb/s.
The GS9064 features DC restoration to compensate for the DC content of SMPTE pathological test patterns, and incorporates a Cable Length Indicator (CLI) that provides a linear indication of the amount of cable being equalized.
A voltage programmable mute threshold (MCLADJ) is included to allow muting of the GS9064 output when a selected cable length is reached. This feature allows the GS9064 to distinguish between low amplitude SDI signals and noise at the input of the device. The CD/MUTE pin provides an indication of the GS9064 mute status in addition to functioning as a mute control input. The output of the GS9064 may be forced to an active or a mute condition by applying a voltage to the CD/MUTE pin.
GS9064 Maximum Ratings
| PARAMETER |
VALUE |
| Supply Voltage Input ESD Voltage Storage Temperature Range Input Voltage Range (any input) Operating Temperature Range Power Dissipation Lead Temperature (soldering, 10 sec.) |
-0.5V to +3.6 VDC |
GS9064 Features
• SMPTE 259 and SMPTE 344 compliant
• automatic cable equalization
• supports DVB-ASI at 270Mb/s
• typical maximum equalized length of Belden 1694A cable at 270Mb/s is 350m
• 50 differential output (with internal 50 pull-ups)
• cable length indicator
• output mute based on maximum cable length adjust or manual override
• Pb-free and Green
• single 3.3V power supply operation
• operating temperature range: 0 to +70
• pin compatible with HDLINX™ II GS1524 multirate SDI adaptive cable equalizer
• automatic cable equalization
• supports DVB-ASI at 270Mb/s
• typical maximum equalized length of Belden 1694A cable at 270Mb/s is 350m
• 50 differential output (with internal 50 pull-ups)
• cable length indicator
• output mute based on maximum cable length adjust or manual override
• Pb-free and Green
• single 3.3V power supply operation
• operating temperature range: 0 to +70
• pin compatible with HDLINX™ II GS1524 multirate SDI adaptive cable equalizer
GS9064 Typical Application
• SMPTE 259M Coaxial Cable Serial Digital Interfaces
GS9064 Connection Diagram
GS9000C
PDF/DataSheet Download
- Datasheet: GS9000C
- File Size: 109121 KB
- Manufacturer:
- Click here to Download
- ·GS9000CCPJ
- Serial Digital Decoder
- 109121 KB
- ·GS9000CCTJ
- Serial Digital Decoder
- 109121 KB
- ·GS9001
- EDH COPROCESSOR
- 216196 KB
- ·GS9001-CQM
- EDH COPROCESSOR
- 216196 KB
- ·GS9004C
- Serial Digital Cable Equalizer
- 100863 KB
- ·GS9004CCKB
- Serial Digital Cable Equalizer
- 100863 KB
- ·GS9004CCTB
- Serial Digital Cable Equalizer
- 100863 KB
- ·GS9005A
- Serial Digital Receiver
- 275545 KB
GS9064 Relative Products
GS9062
The GS9062 is a dual-standard serializer with an integrated cable driver. When used in conjunction with the GO1555/GO1525* Voltage Controlled Oscillator, a transmit solution can be realized for SD-SDI and DVB-ASI applications.The device features an internal ...
GS9060
The GS9060 is a reclocking deserializer with a serial loop-through cable driver. When used in conjunction with any Gennum cable equalizer and the GO1555/GO1525* Voltage Controlled Oscillator, a receive solution can be realized for SD-SDI and DVB-ASI applicat...
GS9035C
The GS9035C is a high performance clock and data recovery IC designed for serial digital data. The GS9035C receives either single-ended or differential PECL data and outputs differential PECL clock and retimed data signals.The GS9035C can operate in either a...
GS9035A
The GS9035A is a high performance clock and data recovery IC designed for serial digital data. The GS9035A receives either single-ended or differential PECL data and outputs differential PECL clock and retimed data signals.The GS9035A can operate in either a...
GS9032
The GS9032 encodes and serializes SMPTE 125M and 244M bit parallel digital video signals, and other 8-bit or 10-bit parallel formats. GS9032 performs sync detection, parallel to serial conversion, data scrambling (using the X9 + X4 + 1 algorithm), 10x parall...
GS9029
The GS9029 is a second generation bipolar integrated circuit designed to drive four 75Ω co-axial cables. The GS9029 features two pairs of complementary outputs whose amplitude is controlled within ±7.5%. The output signal levels are also adjustable fro...
Hotspot Suppliers Product
M29W128GL-70N6E
Price: 3.3-3.6 USD
128 Mbit, 3 V supply Flash memory, TSOP-56, Fast Program commands, Common Flash interface
EMM5074VU
Price: 100-150 USD
High Output Power, 33dBm, C-band power, amplifier MMIC, 50Ω
AD8608AR
Price: 1.8-2.3 USD
rail-to-rail input and output, single-supply amplifier, SOP14, 6 V, Low offset voltage, Low input...
LC75854
Price: 1.29-1.5 USD
LCD display driver, QFP64, –0.3 to +7.0 V, 1 mA, 200 mW
LM3080AN
Price: 1.8-2 USD
LM3080AN - Operational Transconductance Amplifier - National Semiconductor
AD603AR
Price: 4-4.8 USD
voltage-controlled amplifier, sop-8, ±7.5 V
ADE7758ARWZ
Price: 3.5-5.5 USD
poly phase, multifunction energy, metering IC, SOP, Digital power, 0.3 V, 3 phase
PIC18F4550-I/P
Price: 3.3-4 USD
High-Performance, Enhanced Flash USB Microcontroller, DIP40, Low-speed, 1.5 Mb/s
HIP6301CB
Price: 0.3-3 USD
multi-phase PWM control IC, +7V, gate drivers, Multi-Phase Power Conversion, 20-SOIC
LM3886TF
Price: 1-100000 USD
audio power amplifier, ZIP11, 94V, high-performance, 125W, 60V, An input mute function
PIC16F54-I/SO
Price: 0.01-100 USD
PIC16 Series, 72 B RAM, 3 kB Flash 8, SOIC18, 0V to +6.5V, 800 mW Total power dissipation
SG3731N
Price: 3.8-4.5 USD
DIP16, DC motor control, 350 KHz, Digital SHUTDOWN input, 200mA
