Features: • Extremely low on state voltage drop 1.0V typical at 5.0A• Extremely low VCE(on) variation from lot to lot• Industry standard TO-247AC packageSpecifications Parameter Max. Units VCES Collector-to-Emitter Breakdown Voltage 1200 V IC @ TC = 25...
IRG4PH40S: Features: • Extremely low on state voltage drop 1.0V typical at 5.0A• Extremely low VCE(on) variation from lot to lot• Industry standard TO-247AC packageSpecifications Par...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • Standard: Optimized for minimum saturation voltage and low operating frequencies...
Features: • UltraFast: Optimized for high operating frequencies 8-40kHz in hard switching, &...
Features: • Designed expressly for switch-mode power supply and PFC (power factor correction...
|
Parameter |
Max. |
Units | |
| VCES | Collector-to-Emitter Breakdown Voltage |
1200 |
V |
| IC @ TC = 25°C | Continuous Collector Current |
33 |
A
|
| IC @ TC = 100°C | Continuous Collector Current |
20 | |
| ICM | Pulsed Collector Current |
66 | |
| ILM | Clamped Inductive Load Current |
66 | |
| VGE | Gate-to-Emitter Voltage |
±20 |
V |
| EARV | Reverse Voltage Avalanche Energy |
250 |
mJ |
| PD @ TC = 25°C | Maximum Power Dissipation |
160 |
W |
| PD @ TC = 100°C | Maximum Power Dissipation |
65 | |
| TJ TSTG |
Operating Junction and Storage Temperature Range |
-55 to + 150 |
°C
|
| Soldering Temperature, for 10 seconds |
300 (0.063 in. (1.6mm) from case) | ||
| Mounting torque, 6-32 or M3 screw |
10 lbf•in (1.1N•m) |
|
Parameter |
Typ. |
Max. |
Units | |
| RJC | Junction-to-Case |
- |
0.77 |
°C/W |
| RCS | Case-to-Sink, Flat, Greased Surface |
0.24 |
- | |
| RJA | Junction-to-Ambient (Typical Socket Mount) |
- |
40 | |
| Wt | Weight |
6 (0.21) |
- |
g(oz) |