Features: (VS =5V,TA = 25˚C typical values unless specified) Input common mode voltage 0.5V beyond rails Output voltage swing (RL =2kΩ) 50mV from rails Output short circuit current ±200mA Continuous output current 75mA Supply current (per amp, no load) 750µA Supply voltage range5V...
LM6588: Features: (VS =5V,TA = 25˚C typical values unless specified) Input common mode voltage 0.5V beyond rails Output voltage swing (RL =2kΩ) 50mV from rails Output short circuit current ±200mA...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Output Current | 230 mA |
Offset Voltage max, 25C | 4 mV |
Gain Bandwidth | 15.4 MHz |
Supply Min | 5 Volt |
Supply Max | 16 Volt |
Supply Current Per Channel | 0.8 mA |
PowerWise Rating 2 | 51.9 uA/MHz |
Slew Rate | 15 Volts/usec |
Input OutputType | R-R In and Out |
Max Input Bias Current | 7000 nA |
Voltage Noise | 23 nV/root(Hz) |
Shut down | No |
Function | Op Amp |
Channels | 4 Channels |
Temperature Min | -40 deg C |
Temperature Max | 85 deg C |
View Using Catalog |
The LM6588 is a low power, high voltage, rail-to-rail input-output amplifier ideally suited for LCD panel VCOM driver and gamma buffer applications. The LM6588 contains four unity gain stable amplifiers in one package. It provides a common mode input ability of 0.5V beyond the supply rails, as well as an output voltage range that extends to within 50mV of either supply rail. With these capabilities, the LM6588 provides maximum dynamic range at any supply voltage. Operating on supplies ranging from 5V to 16V, while consuming only 750µA per amplifier, the LM6588 has a bandwidth of 24MHz (−3dB).
The LM6588 also features fast slewing and settling times,along with a high continuous output capability of 75mA. This output stage is capable of delivering approximately 200mA peak currents in order to charge or discharge capacitive loads. These features are ideal for use in TFT-LCDs.
The LM6588 is available in the industry standard 14-pin SO package and in the space-saving 14-pin TSSOP package.
The amplifiers are specified for operation over the full −40˚C to +85˚C temperature range.