Purchase M51995FP, In-stock M51995FP From SeekIC.
D/C:09+
Part Number: M51995FP
D/C: 09+
Description: M51995A is the primary switching regulator controller which is especially designed to get the regulate...
- Table of contents:
M51995FP
-
Suppliers
DataSheet
General Description
M51995FP General Description
M51995A is the primary switching regulator controller which is especially designed to get the regulated DC voltage from AC power supply.
This IC can directly drive the MOS-FET with fast rise and fast fall output pulse.
Type M51995A has the functions of not only high frequency OSC and fast output drive but also current limit with fast response and high sensibility so the true "fast switching regulator" can be realized.
It has another big feature of current protection to short and over current,owing to the integrated timer-type protection circuit,if few parts are added to the primary side.
The M51995A is equivalent to the M51977 with externally resettable OVP(over voltage protection)circuit.
M51995FP Maximum Ratings
| Symbol | Parameter | Conditions |
Ratings |
Unit |
| VCC | Supply Voltage |
36 |
V | |
| VC | Collector voltage |
36 |
V | |
| IO | Output current | Peak |
±2 |
A |
| Continuous |
±0.15 | |||
| VVF | VF terminal voltage |
VCC |
V | |
| VON/OFF | ON/OFF terminal voltage |
VCC |
V | |
| VCLM- | CLM-terminal voltage |
-4.0 to +4.0 |
V | |
| VCLM+ | CLM+terminal voltage |
-0.3 to +4.0 |
V | |
| IOVP | OVP terminal current |
8 |
mA | |
| VDET | DET terminal voltage |
6 |
V | |
| IDET | DET terminal input current |
5 |
mA | |
| VFB | F/B terminal voltage |
0~10 |
V | |
| ITON | T-ON terminal input current |
-1 |
mA | |
| ITOFF | T-OFF terminal input current |
-2 |
mA | |
| Pd | Power dissipation |
1.5 |
W | |
| K | Thermal derating factor | Ta= 25 |
12 |
mW/ |
| Topr | Operating temperature | Ta> 25 |
-30 to +85 |
|
| Tstg | Storage temperature |
40 to +125 |
| |
| Tj | Junction temperature |
150 |
|
Note 1."+" sign shows the direction of current flow into the IC and "-" sign shows the current flow from the IC.
2.This terminal has the constant voltage characteristic of 6 to 8V,when current is supplied from outside.The maximum allowable voltage is 6V when the constant voltage is applied to this terminal.And maximum allowable current into this terminal is 5mA.
3.The low impedance voltage supply should not be applied to the OVP terminal.
M51995FP Features
•500kHz operation to MOS FET
•Output current...............................................................±2A
•Output rise time 60ns,fall time 40ns
•Modified totempole output method with small through current
Compact and light-weight power supply
•Small start-up current............................................90A typ.
•Big difference between "start-up voltage" and "stop voltage" makes the smoothing capacitor of the power input section small.
Start-up threshold 16V,stop voltage 10V
•Packages with high power dissipation are used to with-stand the heat generated by the gate-drive current of MOS FET.
16-pin DIP,20-pin SOP 1.5W(at 25°C)
Simplified peripheral circuit with protection circuit and built-in large-capacity totempole output
•High-speed current limiting circuit using pulse-by-pulse method(Two system of CLM+pin,CLM-pin)
•Protection by intermittent operation of output over current..........Timer protection circuit
•Over-voltage protection circuit with an externally re-settable latch(OVP)
•Protection circuit for output miss action at low supply voltage(UVLO)
High-performance and highly functional power supply
•Triangular wave oscillator for easy dead time setting
•Output current...............................................................±2A
•Output rise time 60ns,fall time 40ns
•Modified totempole output method with small through current
Compact and light-weight power supply
•Small start-up current............................................90A typ.
•Big difference between "start-up voltage" and "stop voltage" makes the smoothing capacitor of the power input section small.
Start-up threshold 16V,stop voltage 10V
•Packages with high power dissipation are used to with-stand the heat generated by the gate-drive current of MOS FET.
16-pin DIP,20-pin SOP 1.5W(at 25°C)
Simplified peripheral circuit with protection circuit and built-in large-capacity totempole output
•High-speed current limiting circuit using pulse-by-pulse method(Two system of CLM+pin,CLM-pin)
•Protection by intermittent operation of output over current..........Timer protection circuit
•Over-voltage protection circuit with an externally re-settable latch(OVP)
•Protection circuit for output miss action at low supply voltage(UVLO)
High-performance and highly functional power supply
•Triangular wave oscillator for easy dead time setting
M51995FP Connection Diagram
M51995FP
PDF/DataSheet Download
- Datasheet: M51995FP
- File Size: 472640 KB
- Manufacturer: MITSUBISHI [Mitsubishi Electric Semiconductor]
- Click here to Download
- ·M5106
- ETC [ETC]
- 6 SEC VOICE
- 102257 KB
- ·M5109
- ETC [ETC]
- 9 SEC VOICE
- 102300 KB
- ·M51131L
- MITSUBISHI [Mitsubishi Electric Semiconductor]
- 2 CHANNEL ELECTRONIC VOLUME BALANCE
- 548974 KB
- ·M51132
- Renesas Technology
- 2ch Electronic Volume Balance
- 350475 KB
- ·M51132FP
- RENESAS [Renesas Technology Corp]
- 2ch Electronic Volume Balance
- 350475 KB
- ·M51132L
- RENESAS [Renesas Technology Corp]
- 2ch Electronic Volume Balance
- 350475 KB
- ·M51134FP
- BASS EMPHASIS CIRCUIT,SOP,20PIN,PLASTIC
- 171526 KB
- ·M51134P
- BASS EMPHASIS CIRCUIT,DIP,20PIN,PLASTIC
- 171526 KB
M51995FP Relative Products
M51995AP
M51995A is the primary switching regulator controller which is especially designed to get the regulated DC voltage from AC power supply.This IC can directly drive the MOS-FET with fast rise and fast fall output pulse.Type M51995A has the functions of not onl...
M51995AFP#CF0J
IC SW REG CONTROLLER 20SOP
M51994P
The M51994P is a semiconductor integrated circuit designed for controlling primary-control two-output switching regulators and it is best suitable for obtaining DC stabilized voltage from the commercial power supply.This provides fast rise/fall time of the o...
M51971L
The M51971 is a semiconductor integrated circuit designed to control the motor rotating speed.The built-in FG amplifier with high gain enables to use a wide range of rotating speed detector (FG detector).Use of less external parts enables DC motors to be con...
M51971FP
The M51971 is a semiconductor integrated circuit designed to control the motor rotating speed.The built-in FG amplifier with high gain enables to use a wide range of rotating speed detector (FG detector).Use of less external parts enables DC motors to be con...
M51970L
The M51970L is a semiconductor integrated circuit designed to control the motor rotating speed.Connection of the rotating speed detector (F-G detector) to theinput keeps the motor rotating speed constant with high precision. Connection of an appropriate powe...
Hotspot Suppliers Product
MOC3041
Price: 0.25-0.25 USD
AlGaAs infrared emitting diode, monolithic silicon detector, Zero voltage crossing
XPT4663
Price: 0.14-0.18 USD
XPT4663, SOP16\DIP16, XPTEK TECHNOLOGY CO.,LTD
LM239N
Price: 0.3-0.5 USD
Low-power quad voltage comparator, DIP, 4 Channels, 1500 mW, Through Hole, 5 mV
D203B
Price: 0.35-0.45 USD
pyroelectric infrared sensor, TO-5, 0.3 to 1.2V, PIR Sensor Co., Ltd., D203B
BFG591
Price: 0.1-0.4 USD
15V, 7GHz, SOT-223, NPN silicon planar epitaxial transistor, 2W, RoHS Compliant
PL2303HX
Price: 0.6-0.65 USD
USB to RS-232 Bridge Controller, SSOP28, RS232 Serial interface
SN74HCT14PWR
Price: 0.1-1 USD
HEX schmitt-trigger inverter, SOP, –0.5 V to 7 V, Low Power Consumption
ULN2003APG
Price: 0.1-0.5 USD
high-current darlington driver, 50V, 0.5A, 16DIP, 1.47 W, ULN2003APG
LPC2366FBD100
Price: 6-7 USD
Single-chip 16-bit/32-bit microcontrollers, up to 512 kB flash, LQFP, 3.0V to 3.6V
78F9116B
Price: 0.85-1 USD
8-bit, single-chip microcontroller, TSSOP, 16 KB, 4 channels, A/D converter
A3P125-VQG100
Price: 2.4-14 USD
FPGA, QFP, –0.3 to 3.75 V, Firm-Error Immune, High Performance, On-Chip User Nonvolatile Memory
0208.750MXEP
Price: 0.09-0.15 USD
350V Fast-Acting Fuse, DIP, 750mA, 350VAC, Fast Acting, Lead Free, RoHS Compliant, cartridge form
