Purchase MX29LV400CT, In-stock MX29LV400CT From SeekIC.
Part Number: MX29LV400CT
Description: The MX29LV400C T/B is a 4-mega bit Flash memory organized as 512K bytes of 8 bits or 256K words of 16 ...
- Table of contents:
MX29LV400CT
-
Suppliers
DataSheet
General Description
MX29LV400CT General Description
The MX29LV400C T/B is a 4-mega bit Flash memory organized as 512K bytes of 8 bits or 256K words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV400C T/B is packaged in 44-pin SOP, 48-pin TSOP and 48-ball CSP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.
The standard MX29LV400C T/B offers access time as fast as 55ns, allowing operation of high-speed microprocessors without wait states. To eliminate bus contention, the MX29LV400C T/B has separate chip enable (CE#) and output enable (OE#) controls.
MXIC's Flash memories augment EPROM functionality with in-circuit electrical erasure and programming. The MX29LV400C T/B uses a command register to manage this functionality. The command register allows for 100% TTL level control inputs and fixed power supply levels during erase and programming, while maintaining maximum EPROM compatibility.
MXIC Flash technology reliably stores memory contents even after 100,000 erase and program cycles. The MXIC cell is designed to optimize the erase and programming mechanisms. In addition, the combination of advanced tunnel oxide processing and low internal electric fields for erase and program operations produces reliable cycling.
The MX29LV400C T/B uses a 2.7V~3.6V VCC supply to perform the High Reliability Erase and auto Program/Erase algorithms.
The highest degree of latch-up protection is achieved with MXIC's proprietary non-epi process. Latch-up protection is proved for stresses up to 100 milliamps on address and data pin from -1V to VCC + 1V.
MX29LV400CT Maximum Ratings
Storage Temperature
Plastic Packages . . . . . . . . . . . . . .. -65 to +150
Ambient Temperature
with Power Applied. . . . . . . . . . . . ..-65 to +125
Voltage with Respect to Ground
VCC (Note 1) . . . . . . . . . . . . . . . . . -0.5 V to +4.0 V
A9, OE#, and
RESET# (Note 2) . . . . . . . . . . . ....-0.5 V to +12.5 V
All other pins (Note 1) . . . . . . .-0.5 V to VCC +0.5 V
Output Short Circuit Current (Note 3) . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is -0.5 V. During voltage transitions, input or I/O pins may overshoot VSS to -2.0 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is VCC +0.5 V.During voltage transitions, input or I/O pins may overshoot to VCC +2.0 V for periods up to 20 ns.
2. Minimum DC input voltage on pins A9, OE#, and RESET# is -0.5 V. During voltage transitions, A9, OE#, and RESET# may overshoot VSS to -2.0 V for periods of up to 20 ns. Maximum DC input voltage on pin A9 is +12.5 V which may overshoot to 14.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
MX29LV400CT Features
• Ready/Busy# pin (RY/BY#)
- Provides a hardware method of detecting program or erase operation completion
• Sector protection
- Hardware method to disable any combination of sectors from program or erase operations
- Temporary sector unprotect allows code changes in previously locked sectors
• CFI (Common Flash Interface) compliant
- Flash device parameters stored on the device and provide the host system to access
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Boot Sector Architecture
- T = Top Boot Sector
- B = Bottom Boot Sector
• Package type:
- 44-pin SOP
- 48-pin TSOP
- 48-ball CSP (6 x 8mm)
- 48-ball CSP (4 x 6mm)
- All Pb-free devices are RoHS Compliant
• Compatibility with JEDEC standard
- Pinout and software compatible with single-power supply Flash
• 20 years data retention
• Extended single - supply voltage range 2.7V to 3.6V
• 524,288 x 8/262,144 x 16 switchable
• Single power supply operation
- 3.0V only operation for read, erase and program operation
• Fully compatible with MX29LV400T/B device
• Fast access time: 55R/70/90ns
• Low power consumption
- 30mA maximum active current
- 0.2uA typical standby current
• Command register architecture
- Byte/word Programming (9us/11us typical)
- Sector Erase (Sector structure 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x1, and 64K-Byte x7)
• Auto Erase (chip & sector) and Auto Program
- Automatically erase any combination of sectors with Erase Suspend capability
- Automatically program and verify data at specified address
• Erase suspend/Erase Resume
- Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase
• Status Reply
- Data# Polling & Toggle bit for detection of program and erase operation completion
MX29LV400CT Connection Diagram
MX205Q
PDF/DataSheet Download
- Datasheet: MX205Q
- File Size: 252911 KB
- Manufacturer: ETC [ETC]
- Click here to Download
- ·MX205QC
- ETC [ETC]
- Low Cost, 5.0g, Dual Axis Accelerometer with Analog Outputs
- 252911 KB
- ·MX205QL
- ETC [ETC]
- Low Cost, 5.0g, Dual Axis Accelerometer with Analog Outputs
- 252911 KB
- ·MX210Q
- ETC [ETC]
- Low Cost, 10g, Dual Axis Accelerometer with Analog Outputs
- 252922 KB
- ·MX210QC
- ETC [ETC]
- Low Cost, 10g, Dual Axis Accelerometer with Analog Outputs
- 252922 KB
- ·MX210QL
- ETC [ETC]
- Low Cost, 10g, Dual Axis Accelerometer with Analog Outputs
- 252922 KB
- ·MX214
- CMLMICRO [CML Microcircuits]
- Variable Split Band Inverter
- 238010 KB
- ·MX23C1010
- MCNIX [Macronix International]
- 1M-BIT MASK ROM (8 BIT OUTPUT)
- 119262 KB
- ·MX23C1010MC-10
- MCNIX [Macronix International]
- 1M-BIT MASK ROM (8 BIT OUTPUT)
- 119262 KB
MX29LV400CT Relative Products
MX29LV400B
The MX29LV400T/MX29LV400B is a 4-mega bit Flash memory or- ganized as 512K bytes of 8 bits or 256K words of 16 bits. MXIC's Flash memories offer the most cost-effec- tive and reliable read/write non-volatile random access memory. The MX29LV400T/B is packaged...
MX29LV320TTI-12
The MX29LV320TTI-12 is designed as one kind of 32-mega bit Flash memory that is byte/word programmable using the Automatic Programming algorithm (which makes the external system do not need to have time out sequence nor to verify the data programmed). Also t...
MX29LV320T
The MX29LV320T/B is a 32-mega bit Flash memory or-ganized as 4M bytes of 8 bits and 2M words of 16 bits.MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory.The MX29LV320T/B is packaged in 48-pin TSOP ...
MX29LV320DBTI-70G
The MX29LV320DBTI-70G is designed as one kind of 32-mega bit flash memory device that offers access time as fast as 4M bytes of 8 bits and 2M words of 16 bits. And this device is designed to be reprogrammed and erased in system or in standard EPROM programme...
MX29LV320B
The MX29LV320T/MX29LV320B is a 32-mega bit Flash memory or-ganized as 4M bytes of 8 bits and 2M words of 16 bits.MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory.The MX29LV320T/B is packaged in 48-...
MX29LV161T/B
The MX29LV161T/B is a 16-mega bit Flash memory organized as 2M bytes of 8 bits or 1M words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV161T/B is packaged in 44-pin SOP, ...
Hotspot Suppliers Product
CY7C64613-128NC
Price: 11-48 USD
full-speed USB, QFP128, 10 mA, 0.5V to +4.0V, Single-chip, Smart SIE, Two UARTS, Two data pointers
IR2112S
Price: 0.45-0.55 USD
High and low side driver, 16-SOIC, -0.3V to 525V, 50 V/ns, 1.25W
2SK3469
Price: 0.1-2 USD
N-channel silicon power MOSFET, TO220F, 500 V, Low on-resistance, High speed switching
TLP521-1
Price: 0.01-10 USD
Programmable Controllers, AC/DC-Input Module, Solid State Relay, DIP-4, 70mA Forward current
INA331AIDGKRG4
Price: 1.2-1.27 USD
CMOS instrumentation amplifier, 2MHz, 14TSSOP, 48mA, 2.5 V ~ 5.5 V, rail-to-rail output
STM32F103RCT6
Price: 2.65-2.9 USD
ARM-based, 32-bit, MCU
XC2V1000-5FG456I
Price: 190-195 USD
platform FPGA, 456FGBGA, 1000000 gates, 324 I/O, RoHS Non-Compliant, –0.5 to 4.0 V
SKKH132/18E
Price: 50-60 USD
SKKH132/18E / Thyristor / Diode Modules
SMAJ40A
Price: 0.0286-0.0365 USD
400W, surface mount, Unidirectional transient voltage, suppressor, 40V, DO-214AC/SMA, 5%
CAT5401WI10
Price: 1-10 USD
Digitally Programmable Potentiometer, SOP, 1.0W
AT89S53-24PI
Price: 4.5-4.8 USD
8-bit Microcontroller, DIP-40, Programmable UART Serial Channel, Programmable Watchdog Timer
MCC162-16IO1
Price: 30-50 USD
MCC162-16IO1, Thyristor Modules, 3600 V, 300A, Semikron, Y4-M6
