PIC16F630

Features:

Special Microcontroller Features:
• Internal and external oscillator options
- Precision Internal 4 MHz oscillator factory calibrated to ±1%
- External Oscillator support for crystals and resonators
- 5 s wake-up from SLEEP, 3.0V, typical
• Power saving SLEEP mode
• Wide operating voltage range - 2.0V to 5.5V
• Industrial and Extended temperature range
• Low power Power-on Reset (POR)
• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Brown-out Detect (BOD)
• Watchdog Timer (WDT) with independent oscillator for reliable operation
• Multiplexed MCLR/Input-pin
• Interrupt-on-pin change
• Individual programmable weak pull-ups
• Programmable code protection
• High Endurance FLASH/EEPROM Cell
- 100,000 write FLASH endurance
- 1,000,000 write EEPROM endurance
- FLASH/Data EEPROM Retention: > 40 years Low Power Features:
• Standby Current:
- 1 nA @ 2.0V, typical
• Operating Current:
- 8.5A @ 32 kHz, 2.0V, typical
- 100A @ 1 MHz, 2.0V, typical
• Watchdog Timer Current
- 300 nA @ 2.0V, typical
• Timer1 oscillator current:
- 4 A @ 32 kHz, 2.0V, typical Peripheral Features:
• 12 I/O pins with individual direction control
• High current sink/source for direct LED drive
• Analog comparator module with:
- One analog comparator
- Programmable on-chip comparator voltage reference (CVREF) module
- Programmable input multiplexing from device inputs
- Comparator output is externally accessible
• Analog-to-Digital Converter module (PIC16F676):
- 10-bit resolution
- Programmable 8-channel input
- Voltage reference input
• Timer0: 8-bit timer/counter with 8-bit programmable prescaler
• Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Gate Input mode
- Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected
• In-Circuit Serial ProgrammingTM (ICSPTM) via two pins




Pinout






Specifications

Ambient temperature under bias........................................-40 to +125°C
Storage temperature .....................................................-65°C to +150°C
Voltage on V_DD with respect to V_SS .....................................-0.3 to +6.5V
Voltage on MCLR with respect to Vss .................................-0.3 to +13.5V
Voltage on all other pins with respect to V_SS ...........-0.3V to (V_DD + 0.3V)
Total power dissipation⁽¹⁾ ............................................................800 mW
Maximum current out of V_SS pin .....................................................200 mA
Maximum current into V_DD pin ........................................................250 mA
Input clamp current, I_IK (V_I < 0 or V_I > V_DD)................................ .± 20 mA
Output clamp current, I_OK (V_o < 0 or V_o >V_DD) .............................± 20 mA
Maximum output current sunk by any I/O pin....................................25 mA
Maximum output current sourced by any I/O pin ............................. 25 mA
Maximum current sunk by PORTA and PORTC (combined) ...............200 mA
Maximum current sourced PORTA and PORTC (combined)................200 mA

Parameter Name	Value
Program Memory Type	Flash
Program Memory (KB)	1.75
CPU Speed (MIPS)	5
RAM Bytes	64
Data EEPROM (bytes)	128
Timers	1 x 8-bit, 1 x 16-bit
Comparators	1
Temperature Range (C)	-40 to 125
Operating Voltage Range (V)	2 to 5.5
Pin Count	14

Description

This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip's powerful PIC16F630, MCU architecture into a 14-pin package and features 1 comparator and 128 bytes of EEPROM data memory. This device is easily adapted for automotive, industrial, appliances and consumer entry-level product applications that require field re-programmability.