Features: `Display Driver Output Circuits - 65 common outputs / 132 segment outputs`On-chip Display Data RAM - Capacity: 65 x 132 = 8,580 bits - RAM bit data 1 : a dot of display is illuminated. - RAM bit data 0 : a dot of display is not illuminated.`Microprocessor Interface - High-speed 8-bit p...
S6B0724: Features: `Display Driver Output Circuits - 65 common outputs / 132 segment outputs`On-chip Display Data RAM - Capacity: 65 x 132 = 8,580 bits - RAM bit data 1 : a dot of display is illuminated. - ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
| Parameter |
Symbol |
Rating |
Unit |
| Supply voltage range |
VDD |
- 0.3 to + 7.0 |
V |
|
VLCD |
- 0.3 to + 17.0 |
V | |
| Input voltage range |
VIN |
- 0.3 to VDD + 0.3 |
V |
| Operating temperature range |
TOPR |
- 40 to + 85 |
|
| Storage temperature range |
TSTR |
- 55 to + 125 |
The S6B0724 is a single chip driver & controller LSI for graphic dot-matrix liquid crystal display systems. This chip can be connected directly to a microprocessor, accepts serial or 8-bit parallel display data from the microprocessor, stores the display data in an on-chip display data RAM of 65 x 132 bits and generates a liquid crystal display drive signal independent of the microprocessor. It provides a high-flexible display section due to 1-to-1 correspondence between on-chip display data RAM bits and LCD panel pixels. It contains 65 common driver circuits and 132 segment driver circuits, so that a single chip can drive a 65 x 132 dot display. And the capacity of the display can be increased through the use of master/slave multi-chip structures.
S6B0724 are able to minimize power consumption because it performs display data RAM read / write operation with no external operation clock. In addition, because it contains power supply circuits necessary to drive liquid crystal, which is a display clock oscillator circuit, high performance voltage converter circuit, high-accuracy voltage regulator circuit, low power consumption voltage divider resistors and OP-Amp for liquid crystal driver power voltage, it is possible to make the lowest power consumption display system with the fewest components for high performance portable systems.