Features: · RS-485 and RS-422 Transceiver· Operates from a single +3.3V supply· Interoperable with +5.0V logic· Driver/Receiver Enable· Low Power Shutdown Mode· -7V to +12V Common-Mode Input Voltage Range· Allows up to 32 transceivers on the serial bus· Compatibility with the industry standard 751...
SP3483: Features: · RS-485 and RS-422 Transceiver· Operates from a single +3.3V supply· Interoperable with +5.0V logic· Driver/Receiver Enable· Low Power Shutdown Mode· -7V to +12V Common-Mode Input Voltage...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.18 - .34 / Piece
DC/DC Switching Controllers 1.5A Boost/Buck/ Inverting Regulator
These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.
VCC...............................................................................................................................+7V
Input Voltages
Logic.................................................................................-0.3V to (VCC+0.5V)
Drivers..............................................................................-0.3V to (VCC+0.5V)
Receivers................................................................................................ ±15V
Output Voltages
Logic..................................................................................-0.3V to (VCC+0.5V)
Drivers..................................................................................................... ±15V
Receivers............................................................................-0.3V to (VCC+0.5V)
Storage Temperature...............................................................................-65°C to +150°C
Power Dissipation per package
8-pin NSOIC (derate 6.14mW/°C above +70°C).....................................................500mW
8-pin PDIP (derate 11.8mW/°C above +70°C).......................................................1000mW
Specifications | |
Vcc (V) | 3.3 |
No. of Tx | 1 |
No. of Rx | 1 |
Duplex | Half |
Data Rate (kbps) | 250 |
ESD (KV) | 2 |
Typ. Shutdown ICC (A) | 1 |
Rx Fail-Safe Open | Yes |
Multi-Drop Nodes | 32 |
The SP3483 device is part of a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. This device is pin-to-pin compatible with the Sipex SP483 device as well as popular industry standards. The SP3483 features Sipex's BiCMOS process, allowing low power operation without sacrificing performance. The SP3483 is internally slew rate limited to reduce EMI and can meet the requirements of RS-485 and RS-422 up to 250kbps.