SP3494

These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.
V_CC ............................................................................................ +6.0V
Input Voltages
Drivers ........................................................................ -0.3V to +6.0V
Receivers ................................................................................... ±14V
Output Voltages
Drivers ....................................................................................... ±14V
Receivers .................................................................... -0.3V to +6.0V
Storage Temperature ................................................. -65°C to +150°
Power Dissipation per Package
8-pin PDIP (derate11.8mW/oC above +70) ...................... 1000mW
8-pin NSOIC (derate 6.90mW/oC above +70) .................... 600mW

The SP3493 and the 3494 devices are +3.3V, low power transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. The SP3493 and the 3494 devices are pin-to-pin compatible with the Sipex SP3490 and the SP3481 devices, respectively, as well as other popular industry standards. SP3494 feature Sipex's BiCMOS process, allowing low power operation without sacrificing performance. The partially slew-rate limited drivers minimize EMI and reduce reflections caused by improperly terminated cables allowing error-free data transmission. The SP3493 is a full-duplex low power transceiver that will deliver a data transmission rate up to 250kbps. The SP3494 is a half-duplex partially slew-rate limited transceiver that will deliver a data transmission rate up to 2.5Mbps. The SP3494 is equipped with a low-power shutdown mode and driver/receiver high-Z enable lines.