Features: SpecificationsDescriptionThe SP8716,SP8718,SP8719 are 50mW programmable dividers with a maximum specified operating frequency of 520MHz over the temperature range -40 to +85.The signal (clock) inputs are biased internally and require to be capacitor coupled. The output stage is of an unu...
SP8716: Features: SpecificationsDescriptionThe SP8716,SP8718,SP8719 are 50mW programmable dividers with a maximum specified operating frequency of 520MHz over the temperature range -40 to +85.The signal (cl...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The SP8716,SP8718,SP8719 are 50mW programmable dividers with a maximum specified operating frequency of 520MHz over the temperature range -40 to +85.The signal (clock) inputs are biased internally and require to be capacitor coupled. The output stage is of an unusual low power design featuring dynamic pull-up, and optimised for driving CMOS. The 0 to 1 output edge should be used to give the best loop delay performance.
The SP8716,SP8718,SP8719 have some absolute maximum ratings.When parameter is supply voltage,the rating is 8V.When parameter is storage temperature range,the rating is -55 to +150.When parameter is Max. junction temperature,the rating is +175.When parameter is Max. clock I/P voltage,the rating is 2.5V p-p.
This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information of SP8716 appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. SP8716 is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink's conditions of sale which are available on request.