Features: ` 5 x 8 dot matrix possible ` Low power operation support: -- 2.7 to 5.5V ` Range of LCD driver power -- 2.7 to 7.0V ` 4-bit, 8-bit, serial or 400kbits/s fast I2C-bus MPU interface enabled ` 80 x 8-bit display RAM (80 characters max.) ` 10,240-bit character generator ROM for a tota...
ST7036: Features: ` 5 x 8 dot matrix possible ` Low power operation support: -- 2.7 to 5.5V ` Range of LCD driver power -- 2.7 to 7.0V ` 4-bit, 8-bit, serial or 400kbits/s fast I2C-bus MPU interface ena...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
| Characteristics |
Symbol |
Value |
| Power Supply Voltage |
VDD |
-0.3 to +7.0 |
| LCD Driver Voltage |
VLCD |
7.0- Vss to -0.3+Vss |
| Input Voltage |
VIN |
-0.3 to VDD+0.3 |
| Operating Temperature |
TA |
-40 to + 90 |
| Storage Temperature |
TSTO |
-55 to + 125 |
The ST7036 dot-matrix liquid crystal display controller and driver LSI displays alphanumeric, Japanese kana characters, and symbols. It can be configured to drive a dot-matrix liquid crystal display under the control of a 4-/ 8-bit, serial or fast I2C interface microprocessor. Since all the functions such as display RAM, character generator, and liquid crystal driver, required for driving a dot-matrix liquid crystal display are internally provided on one chip, a minimal system can be interfaced with this ontroller/driver.
The ST7036 character generator ROM is extended to generate 256 5x8dot character fonts for a total of 256 different character fonts. The low power supply (2.7V to 5.5V) of the ST7036 is suitable for any portable battery-driven product requiring low power dissipation.
The ST7036 LCD driver consists of 17 common signal drivers and 100 segment signal drivers. And the second mode is consists of 25 common signal and 80 segment signal drivers. The maximum display RAM size can be either 80 characters in 1-line display or 40 characters in 2-line display or 16 characters in 3-line. A single ST7036 can display up to one 20-character line or two 20-character lines or three 16-character lines.
No extra drivers can be cascaded.