ZNBG3115

Features: • Provides bias for GaAs and HEMT FETs• Drives up to three FETs• Dynamic FET protection• Drain current set by external resistor• Regulated negative rail generator requires only 2 external capacitors• Choice in drain voltage• Wide supply voltage r...

product image

ZNBG3115 Picture
SeekIC No. : 004551754 Detail

ZNBG3115: Features: • Provides bias for GaAs and HEMT FETs• Drives up to three FETs• Dynamic FET protection• Drain current set by external resistor• Regulated negative rail gener...

floor Price/Ceiling Price

Part Number:
ZNBG3115
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/3/28

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Provides bias for GaAs and HEMT FETs
• Drives up to three FETs
• Dynamic FET protection
• Drain current set by external resistor
• Regulated negative rail generator requires only 2 external capacitors
• Choice in drain voltage
• Wide supply voltage range
• Polarisation switch for LNBs
• 22kHz tone detection for band switching
• Tone detector ignores unwanted signals
• Support fr MIMIC, FET and Bipolar local oscillator devices
• Compliant with ASTRA control specifications
• QSOP 16 and 20 surface mount packages


• Provides bias for GaAs and HEMT FETs
• Drives up to three FETs
• Dynamic FET protection
• Drain current set by external resistor
• Regulated negative rail generator requires only 2 external capacitors
• Choice in drain voltage
• Wide supply voltage range
• Polarisation switch for LNBs
• 22kHz tone detection for band switching
• Tone detector ignores unwanted signals
• Support fr MIMIC, FET and Bipolar local oscillator devices
• Compliant with ASTRA control specifications
• QSOP 16 and 20 surface mount packages





Application

• Satellite receiver LNBs
• Private mobile radio (PMR)
• Cellular telephones





Specifications

Supply Voltage -0.6V to 12V
Supply Current 100mA
Input Voltage (VPOL) 25V Continuous
Drain Current (per FET)(set by RCAL) 0 to 15mA
Output Current 100mA
Operating Temperature -40 to 80
Storage Temperature -40 to 85
Power Dissipation (Tamb 25)QSOP16
QSOP20
500mW
500mW


Part Number ZNBG3115
LNA Bias Stages 3
Mixer Bias Stages
Vout (V)
Max. Total Load (mA)
Vpol (V) 14 to 15.5
FTone (kHz) 22
LNA Vdrain (V) 2.2
LNA Idrain (mA) 0 to 15
Mixer Idrain (mA)
Vg off (V) -2.5
Iq (mA) 7
Vneg (V) -3.0





Description

The ZNBG series of devices are designed to meet the bias requirements of GaAs and HEMT FETs commonly used in satellite receiver LNBs, PMR, cellular telephones etc. with a minimum of external components.

With the addition of two capacitors and a resistor the ZNBG series devices provide drain voltage and current control for three external grounded source FETs, generating the regulated negative rail required for FET gate biasing whilst operating from a single supply. This negative bias, at -2.8 volts, can also be used to supply other external circuits. The ZNBG3115/16 includes bias circuits to drive up to three external FETs. A control input to the device selects either one of two FETs as operational, the third FET is permanently active. This feature is normally used as an LNB polarisation switch. Also specific to Universal LNB applications is the 22kHz tone detection and logic output feature which is used to enable high and low band frequency switching. The ZNBG3115/16 has been designed to cope with DiSEqC™ ready set top boxes and rejects all transients from channel switching. Drain current setting of the ZNBG3115/16 is user selectable over the range 0 to 15mA, this is achieved with addition of a single resistor. The series also offers the choice of drain voltage to be set for the FETs, the 3115 gives 2.2 volts drain whilst the 3116 gives 2 volts.

These ZNBG series devices are unconditionally stable over the full working temperature with the FETs in place, subject to the inclusion of the recommended gate and drain capacitors. These ensure RF stability and minimal injected noise.

ZNBG series is possible to use less than the devices full complement of FET bias controls, unused drain and gate connections can be left open circuit without affecting operation of the remaining bias circuits.

To protect the external FETs the ZNBGseries circuits have been designed to ensure that, under any conditions including power up/down transients, the gate drive from the bias circuits cannot exceed the range -3.5V to 1V. Additionally each stage has its own individual current limiter. Furthermore if the negative rail experiences a fault condition, such as overload or short circuit, the drain supply to the FETs will shut down avoiding excessive current flow.The ZNBG3115/16 are available in QSOP16 and QSOP20 for the minimum in device size. Device operating temperature is -40 to 80°C to suit a wide range of environmental conditions.






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Semiconductor Modules
Static Control, ESD, Clean Room Products
Cables, Wires - Management
Industrial Controls, Meters
Isolators
View more