ZXFV302

• 3dB Bandwidth 300MHz
• Slew rate 450V/ s
• Differential gain 0.01%
• Differential phase 0.04
• Output current 40mA
• Stable up to 100pF load
• ±5 Volt supply
• Supply current 17mA
• 16 pin SO package

Supply voltage V_CC                                  -0.5V to +6V
Supply voltage V_EE                                   -6V to +0.5V
Analog inputs to ground                           V_EE -0.5V to V_CC +0.5V
Digital inputs to ground                             -0.5V to V_CC +0.5V
Outputs to ground*                                   V_EE -0.5V to V_CC +0.5V
Output current, max continous                  40mA
Operating Ambient Temperature Range     - 40 to 85 Storage -65 to 150
Operating Junction temperature TJMAX      150**

**The thermal resistance from the semiconductor die to ambient is typically 120C/W when the SO16 package is mounted on a PCB in free air. The power dissipation of the device when loaded must be designed to keep the device junction temperature below TJMAX.
*During power-up and power-down, these voltage ratings require an appropriate sequence of applying and removing signals and power supplies.

The ZXFV302 is a 4:1 high speed analog switch designed for use as a buffered video multiplexer and other high-speed applications.

It features low different gain and phase distortion. The high speed high output current capability provides 75 cable drive for use in high performance video
applications.

The input channel is selected by means of two logic lines using an internal decoder. An output enable line allows expansion to eight channels using two devices ZXFV302 as shown in the example application figure 1.

An alternative device, ZXFV301 provides the same functionality and pin-out as the ZXFV302 but with four separate logic lines controlling the switch channels directly