About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
MIC2537,MIC2536,MIC2045,
MIC2537
Vendor:Other Category:Other
The MIC2537 is a cost-effective high-side power switch with four independently controlled channels, optimized for buspowered Universal Serial Bus (USB)applications. Few external components are necessary to satisfy USB re...MIC2536
Vendor:Other Category:Other
The MIC2536 is a cost-effective high-side power switch, with two independently controlled channels, optimized for buspowered Universal Serial Bus (USB)applications. Few external components are necessary to satisfy USB re...MIC2529
Vendor:Other Category:Other
The MIC2529 is a high-side power switch optimized for selfpowered (individual port switching) and bus-powered (ganged port switching) Universal Serial Bus (USB) hub applications.An on-board voltage regulator provides the...MIC2527
Vendor:Other Category:Other
The MIC2524 and MIC2527 are cost-effective high-side power switches with four independently controlled channels, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. Few external components...MIC2526
Mfg:AIC Pack:DIP Vendor:Other Category:Other
The MIC2526 is a dual integrated high-side power switch with independent enable and flag functions, optimized for selfpowered and bus-powered Universal Serial Bus (USB) applications. Few external components are necessary...MIC2524
Vendor:Other Category:Other
The MIC2524 and MIC2527 are cost-effective high-side power switches with four independently controlled channels, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. Few external components...MIC2514
Vendor:Other Category:Other
The MIC2514 is an integrated high-side power switch that consists of a TTL compatible input and protected P-channel MOSFET. The MIC2514 can be used instead of a separate high-side driver and MOSFET in many low-voltage a...MIC2506
Mfg:MICREL Pack:SOP Vendor:Other Category:Other
The MIC2505, MIC2505-1, MIC2505-2, and MIC2506 are single and dual integrated high-side power switches that consist of TTL compatible control/enable inputs, a charge pump, and protected N-channel MOSFETs. The MIC2505/6 f...MIC2505/06
Vendor:Other Category:Other
The MIC2505, MIC2505-1, MIC2505-2, and MIC2506 are single and dual integrated high-side power switches that consist of TTL compatible control/enable inputs, a charge pump, and protected N-channel MOSFETs. The MIC2505/6 f...MIC2505
Mfg:MICREL Pack:SOP Vendor:Other Category:Other
The MIC2505, MIC2505-1, MIC2505-2, and MIC2506 are single and dual integrated high-side power switches that consist of TTL compatible control/enable inputs, a charge pump, and protected N-channel MOSFETs. The MIC2505/6 f...MIC-24
Vendor:Other Category:Other
MIC-24/CL enables communication between equipment with current loop interface and devices with RS-232 / V.24 interface. MIC-24/CL operates bidirectionally, full or half-duplex, converting the RS-232 / V.24 voltage levels...MIC23250
Vendor:Other Category:Other
MIC23150
Vendor:Other Category:Other
MIC2310
Vendor:Other Category:Other
MIC23051
Vendor:Other Category:Other
MIC23050
Vendor:Other Category:Other
MIC23031
Vendor:Other Category:Other
MIC23030
Vendor:Other Category:Other
MIC2299
Vendor:Other Category:Other
MIC2298
Vendor:Other Category:Other
MIC2297
Vendor:Other Category:Other
The MIC2297 is a 600KHz PWM boost-switching regulator that is optimized for driving 6-10 series white LEDs. With its internal 40V switch and a guaranteed switch current of 1.2A, the MIC2297 easily drives a string of 10 w...MIC2296
Vendor:Other Category:Other
The MIC2296 is a 600kHz, PWM dc/dc boost switching regulator available in 2mm x 2mm MLF™ package option. High power density is achieved with the MIC2296's internal 34V / 1.2A switch, allowing it to power large load...MIC2295
Vendor:Other Category:Other
The MIC2295 is a 1.2Mhz, PWM dc/dc boost switching regulator available in low profile Thin SOT23 and 2mm x 2mm MLF' package options. High power density is achieved with the MIC2295's internal 34V / 1.2A switch, allowing ...MIC2292C/93C
Vendor:Other Category:Other
The MIC2292C and MIC2293C are high frequency, Pulse Width Modulator (PWM) boost regulators optimized for constant-current, white LED driver applications. Because of their constant PWM switching frequencies of 1.6MHz and ...MIC2292/93
Vendor:Other Category:Other
The MIC2292 and MIC2293 are high frequency, Pulse Width Modulator (PWM) boost regulators optimized for constant-current, white LED driver applications. Because of their constant PWM switching frequencies of 1.6MHz and 2M...MIC2291-15BML_1179767
Vendor:Other Category:Other
The MIC2291 is a 1.2MHz Pulse Width Modulation (PWM), boost-switching regulator that is optimized for high-current, white LED photo flash applications. With a guaranteed switch current of 1.2A, the MIC2291 easily drives ...MIC2291
Vendor:Other Category:Other
The MIC2291 is a 1.2MHz Pulse Width Modulation (PWM), boost-switching regulator that is optimized for high-current, white LED photo flash applications. With a guaranteed switch current of 1.2A, the MIC2291 easily drives ...MIC2290
Vendor:Other Category:Other
The MIC2290 is a 1.2MHz , PWM, boost-switching regulator housed in the small size 2mm * 2mm MLF™-8 package. It features an internal Schottky diode that reduces circuit board area and total solution cost. High power...MIC2289C
Vendor:Other Category:Other
The MIC2289C is a PWM (pulse width modulated), boostswitching regulator that is optimized for constant-current white LED driver applications. The MIC2289C features an internal Schottky diode and three levels of output ov...MIC2289
Vendor:Other Category:Other
The MIC2289 is a PWM (pulse width modulated), boostswitching regulator that is optimized for constant-current white LED driver applications. The MIC2289 features an internal Schottky diode and three levels of output over...MIC2288
Vendor:Other Category:Other
The MIC2288 is a 1.2MHz pulse-width modulation (PWM), DC/DC boost switching regulator available in low profile Thin SOT-23 and 2mm x 2mm MLF package options. High power density is achieved with the MIC2288's internal 34V...MIC2287C
Vendor:Other Category:Other
The MIC2287C is a 1.2MHz pulse width modulated (PWM), boost-switching regulator that is optimized for constant-current, white LED driver applications. With a maximum output voltage of 37V and a switch current of over 500...MIC2287
Vendor:Other Category:Other
The MIC2287 is a 1.2MHz pulse width modulated (PWM), boost-switching regulator that is optimized for constant-current, white LED driver applications. With a maximum output voltage of 34V and a switch current of over 500m...MIC2285A
Vendor:Other Category:Other
MIC2285
Vendor:Other Category:Other
MIC22700
Vendor:Other Category:Other
MIC22601
Vendor:Other Category:Other
MIC22600
Vendor:Other Category:Other
MIC2250
Vendor:Other Category:Other
MIC2245
Vendor:Other Category:Other
MIC22400
Vendor:Other Category:Other
MIC2238
Vendor:Other Category:Other
MIC2224
Mfg:MICREL Pack:QFN D/C:06+ Vendor:Other Category:Other
The MIC2224 is a high efficiency 2MHz PWM synchronous buck switching regulator optimized for powering 2.5G and 3G CDMA RF Power Amplifiers. The output voltage of MIC2224 can be dynamically adjusted with an external DAC t...MIC22200
Vendor:Other Category:Other
MIC2219-3.0BML
Vendor:Other Category:Other
The MIC2219-3.0BML is one member of the MIC2219 family which is designed as the a dual Cap low dropout regulator that can be used in (1)cellular phones; (2)wireless modems; (3)PDAs; (4)LEDs. And MIC2219-3.0BML can be put...MIC2219
Vendor:Other Category:Other
The MIC2219 is a dual |Cap low dropout regulator. The first regulator is capable of sourcing 150mA, while the second regulator can source up to 300mA.Ideal for battery operated applications, the MIC2219 offers 1% accurac...MIC2215-PPPBML
Vendor:Other Category:Other
The MIC2215 is a high performance, triple LDO voltage regulator, with each regulator capable of providing 250mA continuous output current.Ideal for battery operated applications, the MIC2215 offers 1% initial accuracy, e...MIC2215-PMMBML
Mfg:MLF Vendor:Other Category:Other
The MIC2215 is a high performance, triple LDO voltage regulator, with each regulator capable of providing 250mA continuous output current.Ideal for battery operated applications, the MIC2215 offers 1% initial accuracy, e...MIC2215-AAABML
Mfg:MLF Vendor:Other Category:Other
The MIC2215 is a high performance, triple LDO voltage regulator, with each regulator capable of providing 250mA continuous output current.Ideal for battery operated applications, the MIC2215 offers 1% initial accuracy, e...MIC2215
Vendor:Other Category:Other
The MIC2215 is a high performance, triple LDO voltage regulator, with each regulator capable of providing 250mA continuous output current. Ideal for battery operated applications, the MIC2215 offers 1% initial accuracy...MIC2214
Mfg:MICREL Pack:QFN D/C:04+ Vendor:Other Category:Other
The MIC2214 is a dual Cap, low dropout regulator with an open-drain driver and power-on reset circuit. The first regu- lator is capable of sourcing 150mA, while the second regula- tor can source up to 300mA and includes ...MIC2213
Vendor:Other Category:Other
The MIC2213 is a dual Cap low dropout regulator with an open-drain driver and power-on reset circuit. The first regu- lator is capable of sourcing 150mA, while the second regula- tor can source up to 300mA. A power-on re...MIC2212
Mfg:MICREL Pack:QFN D/C:04+ Vendor:Other Category:Other
The MIC2212 is a dual Cap, low dropout regulator with power-on reset circuit. The first regulator is capable of sourc-ing 150mA, while the second regulator can source up to 300mA and includes a power-on reset function.Id...MIC2211
Mfg:N/A Pack:BGA-10 D/C:08+ Vendor:Other Category:Other
The MIC2211 is a dual Cap, low dropout regulator. The first regulator is capable of sourcing 150mA, while the second regulator can source up to 300mA.Ideal for battery operated applications, the MIC2211 offers 1% accurac...MIC2210
Mfg:Micrel Pack:QFN D/C:2003 Vendor:Other Category:Other
The MIC2210 is a dual Cap low dropout regulator with an open-drain driver and power-on reset circuit. The first regulator is capable of sourcing 150mA, while the second regulator can source up to 300mA and includes a pow...MIC2208
Vendor:Other Category:Other
The Micrel MIC2208 is a high efficiency PWM buck (step-down) regulator that provides up to 3A of output current. The MIC2208 operates at 1MHz and has external compensation that allows a closed loop bandwidth of over ...MIC2207
Vendor:Other Category:Other
The Micrel MIC2207 is a high efficiency PWM buck (step-down) regulators that provides up to 3A of output current. The MIC2207 operates at 2MHz and has proprietary internal compensation that allows a closed loop bandwid...MIC2206
Vendor:Other Category:Other
The Micrel MIC2206 is a high efficiency 2MHz PWM synchronous buck (step-down) regulator that features a LOWQ?LDO standby mode that draws only 18mA of quiescent current. The MIC2206 allows an ultra-low noise, small siz...MIC2205
Vendor:Other Category:Other
The Micrel MIC2205 is a high efficiency 2MHz PWM synchronous buck (step-down) regulator that features a LOWQ?LDO standby mode that draws only 18?/SPAN>A of quiescent current. The MIC2205 allows an ultra-low noise, small ...MIC2204
Vendor:Other Category:Other
The Micrel MIC2204 is a high-efficiency, 2MHz PWM syn- chronous buck switching regulator. Power conversion effi-ciency of above 95% is easily obtainable over a wide range of applications. A proprietary internal compensat...MIC2203
Vendor:Other Category:Other
The Micrel MIC2203 is a high efficiency 1MHz PWM synchronous buck switching regulator. It features low noise constant frequency PWM operation with a low dynamic supply current of <1mA. The low noise and efficient oper...MIC2202
Vendor:Other Category:Other
The Micrel MIC2202 is a high efficiency 2MHz PWM synchro- nous buck regulator. The fast 2MHz operation along with a proprietary compensation scheme allows the smallest pos- sible external components. The MIC2202 can oper...MIC2199
Vendor:Other Category:Other
The MIC2199 is a high power 300kHz synchronous buck DC-to-DC controller housed in a small 4mm x 4mm MLF?12-lead package. It operates from a wide 4.5V to 32V input and can be programmed for output voltages from 0.8V to 6V...MIC2198
Vendor:Other Category:Other
The MIC2198 is a high power 500kHz synchronous buck DC-to-DC controller housed in a small 4mm x 4mm MLF?12-lead package. It operates from a wide 4.5V to 32V input and can be programmed for output voltages from 0.8V to 6V...MIC2196
Vendor:Other Category:Other
Micrel MIC2196 is a high efficiencyMIC2194
Vendor:Other Category:Other
Micrel's MIC2194 is a high efficiency PWM buck control IC housed in the SO-8 package. Its 2.9V to 14V input voltagerange allows it to efficiently step down voltages in 3.3V, 5V, and 12V systems as well as 1- or 2-cell Li...MIC2193
Vendor:Other Category:Other
Micrel's MIC2193 is a high efficiency, PWM synchronous buck control IC housed in the SO-8 package. Its 2.9V to 14V input voltage range allows it to efficiently step down voltages in 3.3V, 5V, and 12V systems as well as 1...MIC2186
Vendor:Other Category:Other
Micrel's MIC2186 is a high efficiency boost PWM control IC. With its wide input voltage range of 2.9V to 14V, it can be used to efficiently boost voltages in 1- or 2-cell Li Ion battery powered applications, as well as t...MIC2185
Vendor:Other Category:Other
Micrel's MIC2185 is a high efficiency synchronous boost PWM control IC. With its wide input voltage range of 2.9V to 14V, it can be used to efficiently boost voltages in 1- or 2-cell Li Ion battery powered applications, ...MIC2184
Vendor:Other Category:Other
Micrel's MIC2184 is a high efficiency PWM buck control IC. With its wide input voltage range of 2.9V to 14V, the MIC2184 can be used to efficiently step voltages down in 1- or 2-cell Li Ion battery powered applications, ...MIC2183
Vendor:Other Category:Other
Micrel's MIC2183 is a high efficiency PWM synchronous buck control IC. With its wide input voltage range of 2.9V to 14V, the MIC2183 can be used to efficiently step voltages down in 1- or 2-cell Li Ion battery powered ap...MIC2182BM
Vendor:Micrel Inc Category:Integrated Circuits (ICs)
IC CTRLR SYNC BUCK ADJ HE 16-SOPThe MIC2182BM is one member of the MIC2182 family which designed as the synchronous buck (step-down) switching regulator controller, MIC2182BM can be used in (1)dc power distribution systems; (2)notebook and subnotebook...MIC2182
Vendor:Other Category:Other
Micrel's MIC2182 is a synchronous buck (step-down) switching regulator controller. An all N-channel synchronous architecture and powerful output drivers allow up to a 20A output current capabilty. The PWM and skip-mode c...MIC2179
Vendor:Other Category:Other
The Micrel MIC2179 is a 200kHz synchronous buck (stepdown) switching regulator designed for high-efficiency, battery- powered applications.The MIC2179 operates from a 4.5V to 16.5V input and features internal power MOSFE...MIC2178
Vendor:Other Category:Other
The Micrel MIC2178 is a 200kHz synchronous buck (stepdown) switching regulator designed for high-efficiency, battery- powered applications.The MIC2178 operates from a 4.5V to 16.5V input and features internal power MOSFE...MIC2177
Vendor:Other Category:Other
The Micrel MIC2177 is a 200kHz syn chro nous buck (step-down) switching regulator designed for high-efficiency, bat tery-powered applications. The MIC2177 operates from a 4.5V to 16.5V input and features internal power...MIC2172BN
Mfg:MIC Pack:DIP Vendor:Micrel Inc Category:Integrated Circuits (ICs)
IC REG SW 100KHZ 1.25A 8-DIP The MIC2172 and MIC3172 are complete 100kHz SMPS current-mode controllers with internal 65V 1.25A power switches. The MIC2172 features external frequency syn-chronization or frequency adjustment, while the MIC3172 fea...MIC2172/3172
Vendor:Other Category:Other
MIC2171
Vendor:Other Category:Other
The MIC2171 is a complete 100kHz SMPS current-mode controller with an internal 65V 2.5A power switch.Although primarily intended for voltage step-up applications, the floating switch architecture of the MIC2171 makes it ...MIC2169A
Vendor:Other Category:Other
The MIC2169A is a high-efficiency, simple to use 500kHz PWM synchronous buck control IC housed in a small MSOP-10 package. The MIC2169A allows compact DC/DC solutions with a minimal external component count and cost. ...MIC2169
Vendor:Other Category:Other
The MIC2169 is a high-efficiency, simple to use 500kHz PWM synchronous buck control IC housed in a small MSOP- 10 package. The MIC2169 allows compact DC/DC solutions with a minimal external component count and cost.The M...MIC2168A
Vendor:Other Category:Other
The MIC2168A is a high-effi ciency, simple to use 1MHz PWMsynchronous buck control IC housed in a small MSOP-10package. The MIC2168A allows compact DC/DC solutionswith a minimal external component count and cost.The MI...MIC2168
Vendor:Other Category:Other
The MIC2168 is a high-efficiency, simple to use 1MHz PWM synchronous buck control IC housed in a small MSOP-10 package. The MIC2168 allows compact DC/DC solutions with a minimal external component count and cost.The MIC2...MIC2164
Vendor:Other Category:Other
MIC2159
Vendor:Other Category:Other
The MIC2159 is a high efficiency, simple to use synchronous buck controller ICs housed in a 10-pin MSOP ePAD package. The MIC2159 switches at 400kHz, allowing the smallest possible external components and is designed to ...MIC2155/2156
Vendor:Other Category:Other
MIC2145
Vendor:Other Category:Other
The MIC2145 is a small size boost switching regulator that can provide over 2.5W of output power. The input voltage range is between 2.4V to 16V, making the device suitable for one-cell Li-Ion and 3- to 4-cell alkaline/N...MIC2142
Vendor:Other Category:Other
The MIC2142 is a micropower boost switching regulator housed in a SOT23-5 package. The input voltage range is between 2.2V to 16V, making the device suitable for one-cell Li Ion and 3 to 4-cell alkaline/NiCad/NiMH applic...MIC2141
Vendor:Other Category:Other
The MIC2141 is a micropower boost switching regulator that can operate from 3- or 4-cell nickel-metal-hydride batteries or a single Li-ion cell. This regulator employs a constant 330kHz, fixed 18% duty-cycle, gated-oscil...MIC2130/31
Vendor:Other Category:Other
MIC2086
Vendor:Other Category:Other
The MIC2085 and MIC2086 are single channel positive voltage hot swap controllers designed to allow the safe insertion of boards into live system backplanes. The MIC2085 and MIC2086 are available in 16-pin and 20-pin QSOP...MIC2085/MIC2086
Vendor:Other Category:Other
The MIC2085 and MIC2086 are single channel positive voltage hot swap controllers designed to allow the safe insertion of boards into live system backplanes. The MIC2085 and MIC2086 are available in 16-pin and 20-pin QSOP...MIC2085
Vendor:Other Category:Other
The MIC2085 and MIC2086 are single channel positive voltage hot swap controllers designed to allow the safe insertion of boards into live system backplanes. The MIC2085 and MIC2086 are available in 16-pin and 20-pin QSOP...MIC2077
Vendor:Other Category:Other
The MIC2027 and MIC2077 are quad high-side MOSFET switches optimized for general-purpose power distribution requiring circuit protection. The MIC2027/77 are internally current limited and have thermal shutdown that prote...MIC2076
Vendor:Other Category:Other
The MIC2026 and MIC2076 are high-side MOSFET switches optimized for general-purpose power distribution requiring circuit protection.The MIC2026/76 are internally current limited and have thermal shutdown that protects th...MIC2075
Mfg:MICREL Pack:SOP Vendor:Other Category:Other
The MIC2025 and MIC2075 are high-side MOSFET switches optimized for general-purpose power distribution requiring circuit protection.The MIC2025/75 are internally current limited and have thermal shutdown that protects th...MIC2073/2074
Vendor:Other Category:Other
MIC2072
Vendor:Other Category:Other
The MIC2012 is a dual channel USB power switch designed to support the power distribution requirements for USB Wakeup from the ACPI S3 state. The MIC2012 will directly switch its two outputs between a 5V main supply and ...MIC2070
Vendor:Other Category:Other
The MIC2010 is a dual channel USB power switch designed to support the power distribution requirements for USB Wakeup from the ACPI S3 state. The MIC2010 will directly switch its two outputs between a 5V main supply and ...MIC2045
Vendor:Other Category:Other
The MIC2044 and MIC2045 are high-side MOSFET switches optimized for general purpose power distribution applications that require circuit protection. MIC2044 and MIC2045 switch up to 5.5V and as low as 0.8V while offering...