© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:FAIRCHILD Pack:06+ Vendor:Other Category:Other
Extremely thin and compact, the 0402 chip LED is ideal for compact products. Ultra-miniature footprint, low profile and wide viewing angle make QTLP690C-R a perfect candidate for backlighting cell phone key pads.
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
Designed with a reflective housing, the QTLP680C-RAG offer uniform lighting and high light output performance.
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
We can describe the QTLP680C-23 as this, it is designed t with a reflective housing. These surface mount LEDs offer uniform lighting and high light output performance. The QTLP680C-23 has two applications. The...
Vendor:Other Category:Other
Designed with a reflective housing, the QTLP680C offer uniform lighting and high light output erformance.
Mfg:FAIRCHILD Pack:06+ Vendor:Other Category:Other
The QTLP673C is designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. It is compatible with both IR reflow and TTW (Through-the-Wave) soldering. The QTLP673C is ideal for backl...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
The QTLP670C-RAG is designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. They are compatible with convective IR and vapor phase reflow soldering. The package size and configur...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
The QTLP670C-AG is designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. They are com patible with convective IR and vapor phase reflow soldering. The package size and configur...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
The QTLP670C-34 is designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. They are compatible with convective IR and vapor phase reflow soldering. The package size and configura...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
The QTLP670C25.7744D is designed with a flat top and sides for automatic placement equipment. It is compatible with convective IR and vapor phase reflow soldering and conductive epoxy attachment process. The packag...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
The QTLP670C-2 is designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. hey are compatible with convective IR and vapor phase reflow soldering. The package size and configurati...
Mfg:FSC Pack:PLCC D/C:08+ Vendor:Other Category:Other
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
The QTLP660C-B is designed with a 1.8 mm dome lens that focuses the light output.
Vendor:Other Category:Other
The QTLP660C is designed with a 1.8 mm dome lens that focuses the light output.
Vendor:Other Category:Other
The QTLP653C is designed to fit industry standard footprint. They are reverse mountable and designed to emit light through a small cut-out hole in the PC board.
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
The QTLP652C-R is designed to fit industry standard footprint. They are reverse mountable and designed to emit light through a small cut-out hole in the PC board.
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
The QTLP652C-AG is designed to fit industry standard footprint. They are reverse mountable and designed to emit light through a small cut-out hole in the PC board.
Vendor:Other Category:Other
The QTLP652C is designed to fit industry standard footprint. They are reverse mountable and designed to emit light through a small cut-out hole in the PC board.
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
The QTLP651C-AG is designed to fit industry standard footprint. The package features a recessed, inner lens that focuses the light output, offering greater luminous intensity for direct viewing.
Vendor:Other Category:Other
These surface mount chip LEDs, QTLP651C are designed to fit industry standard footprint. The package features a recessed, inner lens that focuses light output, offering greater luminous intensity for direct viewing.
Mfg:FAIRCHILD Pack:SMD D/C:05+ Vendor:Other Category:Other
This full-color surface mount chip LED, QTLP650D-RGB is designed to fit industry standard footprint. Small size, low profile and wide viewing angle make this LED ideal for backlighting applications and panel illumination...
Mfg:FAIRCHILD Pack:06+ Vendor:Other Category:Other
These super bright bi-color surface mount chip LEDs, QTLP650C-RY are designed to fit industry standard footprint. Small size, low profile and wide viewing angle make these LEDs ideal for backlighting applications and pa...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
These surface mount chip LEDs, QTLP650C-AG are designed to fit industry standard footprint. Low profile and wide viewing angle make these LEDs ideal choices for backlighting applications and panel illumination.
Vendor:Other Category:Other
The QTLP650C7 is a kind of surface mount chip LED. It is designed to fit industry standard footprint. It is ideal for backlighting applications and panel illumination for its low profile and wide viewing angle. The typic...
Vendor:Other Category:Other
These bi-color surface mount chip LEDs are designed to fit industry standard footprint. Small size, low profile and wide viewing angle makes QTLP650C ideal for backlighting applications and panel illumination
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
The QTLP630C-AG is designed to fit industry standard footprint. Low profile and wide viewing angle make theseQTLP630C-AG ideal choices for backlighting applications and panel illumination.
Vendor:Other Category:Other
These surface mount chip LEDs are designed to fit industry standard footprint. Low profile and wide viewing angle makes QTLP630 ideal choices for backlighting applications and panel illumination.
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
This compact right angle surface mount chip LED emits light in the lateral direction. Miniature size and wide viewing angle makes QTLP614CRGB an ideal choice for edge-lighting LCD displays. This device utilizes an InGaN/...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
This right angle surface mount chip LED emits light in the lateral direction. Miniature size and wide viewing angle makes QTLP613C-EB an ideal choice for edge-lighting LCD displays. This device utilizes an InGaN/Sapphire...
Vendor:Other Category:Other
This compact right angle surface mount chip LED emits light in the lateral direction. Miniature size and wide viewing angle make QTLP611C an ideal choice for edge-lighting LCD displays. This device utilizes an InGaN/Sap...
Mfg:EVERLIGHT Pack:. D/C:07+ Vendor:Other Category:Other
QTLP610CPD is a phototransistor in miniature SMD package molded in a water clear plastic with right angle lens.
Vendor:Other Category:Other
QTLP610CIR is an infrared emitter in miniature SMD package molded in a water clear plastic with right angle lens.The QTLP610CIR has six features. The first is right angle surface mount package, and the second feature tha...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
These super bright right angle surface mount chip LEDs emit light in the lateral direction. Small size and wide viewing angle makes QTLP610C-IB ideal choices for status indication in consumer electronics, industrial cont...
Mfg:FAIRCHILD Pack:06+ Vendor:Other Category:Other
This right angle surface mount chip LED emits light in the lateral direction. Small size and wide viewing angle makes QTLP610C-EB an ideal choice for edge-lighting LCD displays. This device utilizes an InGaN/Sapphire bl...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
These super bright right angle surface mount chip LEDs emit light in the lateral direction. Small size and wide viewing angle make QTLP610C-AG ideal choices for status indication in consumer electronics, industrial contr...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
QTLP610C-8: These right angle surface mount lamps emit light in the lateral direction and are particularly suitable for edge lighting LCDs, edge-cards, as well as other standard printed circuit board applications.
Vendor:Other Category:Other
These right angle surface mount chip LEDs emit light in the lateral direction. Small size and wide viewing angle makes QTLP610C ideal choices for status indication in consumer electronics, industrial control and other ap...
Mfg:FAIRCHILD Pack:06+ Vendor:Other Category:Other
This surface mount chip LED is designed to fit industry standard footprint. Small size, low profile and wide viewing angle makes QTLP603C-EB an ideal choice for backlighting applications and panel illumination. This devi...
Mfg:FAIRCHILD Pack:06+ Vendor:Other Category:Other
This surface mount chip LED is designed to fit industry standard footprint. Small size, low profile and wide viewing angle makes QTLP601C-EB an ideal choice for backlighting applications and panel illumination. The QTLP6...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
These surface mount chip LEDs are designed to fit industry standard footprint. Small size, low profile and wide viewing angle makes QTLP601C-AG ideal choices for backlighting applications and panel illumination.
Vendor:Other Category:Other
These surface mount chip LEDs are designed to fit industry standard footprint. Small size, low profile and wide viewing angle makes QTLP601C ideal choices for backlighting applications and panel illumination.
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
These super bright bi-color surface mount chip LEDs are designed to fit industry standard footprint. Small size, low profile and wide viewing angle makes QTLP600C-RAG ideal for backlighting applications and panel illumin...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
These surface mount chip LEDs are designed to fit industry standard footprint. Small size, low profile and wide viewing angle makes QTLP600C-AG ideal choices for backlighting applications and panel illumination.
Vendor:Other Category:Other
These bi-color surface mount chip LEDs, QTLP600C-23 HER/Yellow are designed to fit industry standard footprint. Small size, low profile and wide viewing angle make QTLP600C-23 HER/Yellow ideal for backlighting appl...
Mfg:. Pack:. D/C:07+ Vendor:Other Category:Other
These surface mount chip LEDs are designed to fit industry standard footprint. Small size, low profile and wide iewing angle makes QTLP600C-2 ideal choices for backlighting applications and panel illumination.
Mfg:FAIRCHILD Pack:06+ Vendor:Other Category:Other
The QTLP600C is designed to fit industry standard footprint. Small size, low profile and wide viewing angle make these LEDs ideal for backlighting applications and panel illumination.
Mfg:FAIRCHILD Pack:06+ Vendor:Other Category:Other
This low profile, 4-pin LED, QTLP321C-W provides a more uniform and venly distributed illumination than existing LED designs. Its nique optical package enables designers to utilize fewer LEDs hile achieving superior ligh...
Vendor:Other Category:Other
This low profile, 4-pin LED, QTLP321 provides a more uniform and venly distributed illumination than existing LED designs. Its nique optical package enables designers to utilize fewer LEDs hile achieving superior lightin...
Vendor:Other Category:Other
The QTLP320C-R provides a more uniform and evenly distributed than existing LED designed.Its unique optical package enables to ulitize fewer LEDs while achieving superior lighting performance.
Features of the QTLP320C-R...
Mfg:FAIRCHILD Pack:06+ Vendor:Other Category:Other
This low profile, 4-pin LED QTLP320C-E provides a more uniform and evenly distributed illumination than existing LED designs. Its unique opticalpackage enables designers to utilize fewer LEDs while achieving superior lig...
Vendor:Other Category:Other
The QTLP282-4 is surface mount LED lamp. It is intended for high volume, low cost status indication on PCBs, and for backlighting keyborads and switches.It is compatible with vapor phase reflow or wave solder surface mou...
Vendor:Other Category:Other
The QTLP0C34TR is designed with flat top and sides for the ease of pick-and-place by automatic placement equipment. They are compatible with convective IR and vapor phase reflow soldering. The package size and configurat...
Vendor:Other Category:Other
This totally new termination technique provides the QT-BNC with a high pressure, gas tight center conductor joint of exceptional mechanical integrity, without crimping the center contact. The QT-BNC is a 75 ohm pre-assem...
Vendor:Other Category:Other
The QT9701B-IS is designed as one kind of charge transfer capacitance sensor IC with a few inexpensive external parts it becomes a complete sensor capable of detecting femtofarad capacitance changes while fully cancellin...
Vendor:Other Category:Other
The QT9701B2 is designed as charge-transfer capacitance sensor IC which typical applications include fluid level sensing, security sensing, moisture detection, switch replacement, distance gauging, material properties an...
Vendor:Other Category:Other
The QT8025PBK is designed as one kind of charge transfer capacitance sensor IC with a few inexpensive external parts it becomes a complete sensor capable of detecting femtofarad capacitance changes while fully cancelling...
Vendor:Other Category:Other
The QT6E1 series is designed as ECL oscillators.QT6E1 has five features. The first one is it would have 4 pin & 14 pin DIP in hermetically sealed packages. The second one is it would have low profile which means 0.20...
Vendor:Other Category:Other
The QT60645B is designed as 64-key QMatrix keypanel sensor IC with typical applications of automotive panels, machine tools, ATM machines, touch-screens, appliance controls, outdoor keypads, security keypanels and ...
Mfg:ATMEL D/C:08+ Vendor:Other Category:Other
The QT60486 is designed to detect human touch on up 48 keys when used with a scanned, passive X-Y matrix. They will project touch keys through almost any dielectric, e.g. glass, plastic, stone, ceramic, and even wood, up...
Vendor:Other Category:Other
The QT60485B is designed as 48-key QMatrix keypanel sensor IC with typical applications of automotive panels, machine tools, ATM machines, touch-screens, appliance controls, outdoor keypads, security keypanels and ...
Mfg:ATMEL D/C:08+ Vendor:Other Category:Other
Thee QT60326 is designed to detect human touch on up 48 keys when used with a scanned, passive X-Y matrix. They will project touch keys through almost any dielectric, e.g. glass, plastic, stone, ceramic, and even wood, u...
Vendor:Other Category:Other
The QT60325B is designed as 32-key QMatrix keypanel sensor IC with typical applications of automotive panels, machine tools, ATM machines, touch-screens, appliance controls, outdoor keypads, security keypanels and ...
Vendor:Other Category:Other
The QT60325 digital charge-transfer ("QT") QMatrix™ IC,which projects the keys through almost any dielectric, e.g. glass, plastic, stone, ceramic, and even wood, up to thicknesses of 5 cm or more, is designed...
Vendor:Other Category:Other
The QT60320D is designed as 32-key QMatrix charge-transfer IC with typical applications of security keypanels, industrial keyboards, appliance controls, outdoor keypads, ATM machines, touch-screens, automotive pane...
Vendor:Other Category:Other
This QT60320 digital charge-transfer ("QT") QMatrix™ IC,which will project touch keys through almost any dielectric, e.g. glass, plastic, stone, ceramic, and even wood, up to thicknesses of 5 cm or more,is d...
Mfg:ATMEL D/C:08+ Vendor:Other Category:Other
This digital charge-transfer ("QT") QMatrix™ IC, QT60248, which will project touch keys through almost any dielectric, e.g. glass, plastic, stone, ceramic, and even wood, up to thicknesses of 5 cm or more,is ...
Vendor:Other Category:Other
The QT60161B digital charge-transfer ("QT") QMatrix™ IC,which is designed to detect human touch on up 16 keys,coule be used in conjunction with a scanned, passive X-Y matrix.Also QT60161B is touch areas are d...
Vendor:Other Category:Other
The QT60161 is designed as 16 key QMatrix keypanel sensor IC with typical applications of security keypanels, appliance controls, ATM machines, automotive panels, industrial keyboards, outdoor keypads, touch-screen...
Vendor:Other Category:Other
The QT60040 digital charge-transfer ("QT") QMatrix™ IC is designed to detect touch on up to 4 keys in a scanned 4x1 matrix. It will project the keys through almost any dielectric, like glass, plastic, stone, cerami...
Vendor:Other Category:Other
With the help of Quantum's patented charge-transfer methods,the QUANTUM company has come up with a new type of rotary capacitive touch 'slider' sensor IC.That is the QT511.Because it is a new type,designers could u...
Vendor:Other Category:Other
With the help of Quantum's patented charge-transfer methods,the QUANTUM company has come up with a new type of rotary capacitive touch 'slider' sensor IC.That is the QT510.Because it is a new type,designers could u...
Mfg:Microchip Pack:TSSOP-14 D/C:06+ Vendor:Other Category:Other
With the help of Quantum's patented charge-transfer ('QT') methods,the QUANTUM company make the QT411 QSlide™ IC,which is a new type of linear capacitive touch 'slider' sensor IC. This unique IC allows design...
Vendor:Other Category:Other
The QT320 charge-transfer ("QT") Q touch ICs are self-contained digital controllers capable of dete cting near-proximity or touch from up to 6 electrodes.They allow electrodes to project 6 independent sense fields throug...
Vendor:Other Category:Other
The QT310 charge-transfer ("QT") touch sensor ICs is a self-contained digital IC capable of detecting proximity,touch,or fluid level when connected to a corresponding type of electrode.It project sense fields through alm...
Vendor:Other Category:Other
The QT301 charge-transfer (QT) ICs is a self-contained capacitance-to-analog-converter capable of detecting femotofaraed level changes in capacitance.The QT301 is designed primarily for stand-alone instrumentation appli...
Vendor:Other Category:Other
The QT300 charge-transfer ("QT'") IC which is designed primarily for instrumentation applications,is a self-contained Capacitance-to-Digital-Converter (CDC).You could use it to detect femotofarad level changes in c...
Vendor:Atmel (VA) Category:Integrated Circuits (ICs)
IC SENSOR QTOUCH 4CHAN 20SSOP The QT240-ISSG is designed as 4 key QTouch sensor IC with typical applications of instrument panels, gaming machines, access systems, pointing devices, appliance controls, security systems, PC Peripherals and backl...
Vendor:Atmel (VA) Category:Integrated Circuits (ICs)
SENSOR IC 6CH 5V 5MA SGL 28-SSOPThe QT160-AS is designed as a charge-transfer ("QT") Qtouch IC which is a self-contained digital controller capable of detecting near-proximity or touch from up to 6 electrodes. The QT160-AS allows electrodes to project ...
Vendor:Other Category:Other
The QT160 charge-transfer ("QT") Q touch ICs are self-contained digital controllers capable of dete cting near-proximity or touch from up to 6 electrodes.They allow electrodes to project 6 independent sense fields throug...
Vendor:Other Category:Other
The QT150 is designed as 5 key QTouch sensor IC with typical applications of instrument panels, gaming machines, access systems, pointing devices, appliance controls, security systems, PC Peripherals and backlighte...
Vendor:Other Category:Other
The QT140 is designed as 4 key QTouch sensor IC with typical applications of instrument panels, gaming machines, access systems, pointing devices, appliance controls, security systems, PC Peripherals and backlighte...
Vendor:Other Category:Other
Vendor:Other Category:Other
The QT117L is designed to output raw data over a master-mode SPI port which allows a host MCU to seperately process signal data without any pre-processing by the QT117L.For attention the data is 16-bits and actual...
Vendor:Other Category:Other
The QT115 is a variant of the QT110 having variable sensitivity and the ability to daisy-chain, allowing multiple QT115's to be used in immediate proximity to each other to create a small touch panel of up to 10 keys. Li...
Vendor:Other Category:Other
The QT114 QuickLevel" charge-transfer ("QT") sensor IC is specifically designed to detect point level in fl idsand powders. It will project a sense field through almost any dielectric, like glass, plastic, or ceramic, to...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The QT112 is a variant of the QT110 having a faster response time of 49ms worst case, and 25ms typical. The QT112 is designed for those touch sensing applications where faster speed is paramount, for example in games and...
Vendor:Other Category:Other
The QT111 is a touch sensor IC having recalibration timeouts ("max on-duration") of 5 minutes and infinity. This allows the QT111 to be used in situations where recalibration timeouts are not desired, for example in cert...
Vendor:Other Category:Other
The QT110 / QT110H charge-transfer ("QT'") touch sensor is a self-contained digital IC capable of detecting near-proximity or touch. It will project a sense field through almost any dielectric, like glass, plastic, stone...
Mfg:ATMEL D/C:08+ Vendor:Other Category:Other
The QT1106 charge-transfer ('QT') QTouchTM IC,which allows electrodes to project sense fields through any dielectric such as glass or plastic, is a self-contained, patented charge-transfer capacitive controller.The...
Vendor:Other Category:Other
The QT1103 is designed as QTouch 10-key sensor IC for low cost appliance, mobile, and consumer electronics applications.The QTouch technology is a type of patented charge-transfer sensing method well known for its ...
Vendor:Other Category:Other
The QT1101 is designed as 10 Key QTouch sensor IC with typical applications of MP3 players, mobile phones, PC peripherals, television controls, pointing devices and remote controls. QT1101 has many features.Th...
Vendor:Atmel (VA) Category:Integrated Circuits (ICs)
IC SENSOR QTOUCH 10CHAN 48SSOP The QT1100A-ISG is designed as 10 key QTouch sensor IC with typical applications of PC peripherals, television controls, instrument panels, appliance controls, pointing devices and gaming machines. QT1100A-ISG...
Vendor:Other Category:Other
The QT110 / QT110H charge-transfer ("QT'") touch sensor is a self-contained digital IC capable of detecting near-proximity or touch. It will project a sense field through almost any dielectric, like glass, plastic, stone...
Vendor:Other Category:Other
The QT1081 is designed as 8-key QTouch sensor IC and is an improved, lower cost, simplified circuit version of the popular QT1081 sensor IC for low cost appliance, mobile, and consumer electronics applications.The ...
Vendor:Other Category:Other
The QT1080 is designed as 8 key QTouch sensor IC and is a self-contained digital controller capable of detecting near-proximity or touch on up to eight electrodes. It allows electrodes to project independent sense ...
Vendor:Other Category:Other
The QT102 is designed as QTouch Toggle-mode charge-transfer IC with power management functions.It is a single key QTouch chip combining a touch-on / touch-off toggle mode with timeout and timing override functions,...
Mfg:QUANTEK Vendor:Other Category:Other
Vendor:Atmel (VA) Category:Integrated Circuits (ICs)
IC SENS TOUCH/PROX 1CHAN 6-WSONThe QT100A-ISG is one member of the QT100 family which designed as the charge-transfer ('QT') touch sensor. It is designed specifically for human inter-faces, like control panels, appliances, toys, lighting controls, or ...
Vendor:Other Category:Other
The QT100 is designed as charge-transfer QTouch IC and its is a self-contained digital IC capable of detecting near-proximity or touch. It will project a touch or proximity field through any dielectric like glass, ...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.