Published:2011/8/9 2:57:00 Author:Felicity | Keyword: load-driving multiplier | From:SeekIC
The circuit of a load-driving multiplier consists of multiplier MPY600 and high speed cache OPA633 is shown in fig(a). The relationship between input and output : Vo=VxVy/2. The voltage output by high speed cache OPA633 can drive capacitive load.MPY600 is wide bandwith multiplier, and the features are:1 High bandwidth: current output:75MHz, voltage output 30MHz2 Low noises3 Low feedthrough4 The datum output is GND5 Low misalignment voltage.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/Light_Control/The_circuit_diagram_of_a_load_driving_multiplier_MPY600.html
Print this Page | Comments | Reading(3)
Code: