High Voltage Generator

555 8kV high voltage generater circuit

Published:2011/5/11 4:10:00 Author:May | Keyword: 555, 8kV, high voltage generater

This high voltage generator can generate stable high voltage above 8kV. Its circuit is simple. It is stable and reliable. This circuit includes step-down rectifier, voltage regulator circuit, 18kHz multivibrator type oscillator and booster transformer, etc. Its circuit is shown in diagram 24-32.Step-down rectifier consists of step-down transformer T1 and full bridge rectifier and filter capacitor C1, etc. The rectified 15V DC voltage passes three terminal regulator 7812 to regulated voltage and outputted +12V stable DC voltage, it can offer working voltage for IC2, VT1, etc.Astable multivibrator consits of 555 and R1, R2, C3, etc. Its oscilating frenquency is fc=1.44/(R1+2R2)C3Parameter shown in diagram is designed according to 18.5kHz.   (View)

View full Circuit Diagram | Comments | Reading(1506)

AC high voltage generator

Published:2011/6/20 6:46:00 Author:Lucas | Keyword: AC, high voltage , generator

The chart shown as the chart is the AC high voltage generator. It uses AC 220V input directly , and it has the features of with small size, high efficiency, long working time, high output current and so on. A type can work continuously for longer than five minutes, B type can work in long hours. Component selection: VD1 ~ VD4 use 1N4007 diodes, C1 uses 10μF/400V dielectric capacitor; C2 uses nonpolar 0.47μF/450V capacitor; R1 uses the 10k/5W resistor; R2 uses the 1/8W 10K resistor, R3 uses the 1/8W 1.6MΩ ~ 1.8MΩ resistor, VS uses the 3A/400V unidirectional thyristor, C3 ~ C5 use high pressure lOOp/14kV ceramic capacitors, C6 selects the lOOOp/40kV capacitor with engineering plastic shell.   (View)

View full Circuit Diagram | Comments | Reading(713)

The high voltage electrostatic generator circuit diagram composed of NE555

Published:2011/4/19 1:00:00 Author:Ecco | Keyword: high voltage, electrostatic , generator

The multi-function high-voltage electrostatic generator is based on 555, if matching with high back voltage diode and discharge brush pin, it can be used as a negative oxygen ion generator, ignition, static vacuum cleaner, or high security, etc. 555 and R1, R2, C2 form a multivibrator with non-steady state, the oscillation frequency F = 1.44 / (R1 +2 R2) C2, the argument in the figure is about 20KHZ. After boosted by the transformer T1，then it will get 20KHZ 10KV high voltage on secondary of T1, and it will be 7KV after rectified by D1, the load current can reach 50UA.   (View)

View full Circuit Diagram | Comments | Reading(7558)