Two-tone electronic doorbell 1

Published:2011/8/11 1:51:00 Author:Ecco | Keyword: Two-tone electronic doorbell | From:SeekIC

The two-tone electronic doorbell circuit is composed of the input trigger circuit and audio output circuit, ans it is shown in Figure 3-107. The input trigger circuit is composed of the doorbell button S, transistor V1, resistors Rl-R3, capacitor Cl and dual D flip-flop integrated circuit ICl (Al, A2). Audio output circuit consists of the audio output circuit integrated circuit IC2, capacitor C2, resistors R4, R5, transistor V2 and speaker BL. Rl-R5 select the l/8W or 1/4W carbon film resistors. Cl and C2 select the aluminum electrolytic capacitors with voltage in lOV. Vl uses the S9014 or 3DGl2 silicon NPN transistor; V2 uses Sg013 or S8050 silicon NPN transistor.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/electrical_equipment_circuit/two_tone_electronic_doorbell_1.html

Print this Page | Comments | Reading(3)