Features: ·P1dB Output Power: + 16 dBm·Output IP3: +31 dBm·Single Supply: 8.75V·Ultra Small Package: MSOP8GSpecifications DC Voltage on pin1 8 Volts Input Power (RFin)(Vcc=+5V) +20 dBm Channel temperature(TC) 175 Continuous Pdiss (Ta=60)(derate 4.41mW/ above60 507mW ...
HMC324MS8G: Features: ·P1dB Output Power: + 16 dBm·Output IP3: +31 dBm·Single Supply: 8.75V·Ultra Small Package: MSOP8GSpecifications DC Voltage on pin1 8 Volts Input Power (RFin)(Vcc=+5V) +20 ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe HMC304MS8(E) is a passive high IP3 mixer in 8 lead plastic surface mount Mini Small...
DC Voltage on pin1 |
8 Volts |
Input Power (RFin)(Vcc=+5V) |
+20 dBm |
Channel temperature(TC) |
175 |
Continuous Pdiss (Ta=60)(derate 4.41mW/ above60 |
507mW |
Storage temperature |
-65 to +150 |
Operating temperature |
-55 to +60 |
The HMC324MS8G is a high efficiency GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC amplifier that contains two un-connected amplifiers in parallel inside an 8 lead MSOPG package. When used in conjunction with an external balun, the outputs of the amplifier can be combined to reduce the 2nd harmonic distortion that is generated by the amplifier. With Vcc at +7.5V, the HMC324MS8G offers 13 dB of gain and with power combining and harmonic cancellation, +22 dBm of output power can be achieved. Using a Darlington feedback pair results in reduced sensitivity to normal process variations and provides a good 50-ohm input/ output port match. This amplifier is ideal for RF systems where high linearity is required. The design can operate in 50-ohm and 75-ohm systems which makes it ideal for CATV head-end and modem, and MCNS applications.