Purchase IDT54FCT16373T, In-stock IDT54FCT16373T From SeekIC.
Part Number: IDT54FCT16373T
Description: The FCT16373T/AT/CT/ET and FCT162373T/AT/CT/ET 16-bit transparent D-type latches are built using advan...
- Table of contents:
IDT54FCT16373T
-
Suppliers
DataSheet
General Description
IDT54FCT16373T General Description
The FCT16373T/AT/CT/ET and FCT162373T/AT/CT/ET 16-bit transparent D-type latches are built using advanced dual metal CMOS technology. These high-speed, low-power latches are ideal for temporary storage of data. They can be used for implementing memory address latches, I/O ports, and bus drivers. The Output Enable and Latch Enable controls are organized to operate each device as two 8-bit latches, or one 16-bit latch. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin.
The FCT16373T/AT/CT/ET are ideally suited for driving high-capacitance loads and low-impedance backplanes. The output buffers are designed with power off disable capability to allow "live insertion" of boards when used as backplane drivers.
The FCT162373T/AT/CT/ET have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The FCT162373T/AT/CT/ET are plug-in replacements for the FCT16373T/AT/CT/ET and ABT16373 for on-board interface applications.
IDT54FCT16373T Maximum Ratings
.
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
2. All device terminals except FCT162XXXT Output and I/O terminals.
3. Output and I/O terminals for FCT162XXXT.
| Symbol |
Description |
Max. |
Unit |
| VTERM(2) | Terminal Voltage with Respect to GND |
-0.5 to +7.0 |
V |
| VTERM(3) | Terminal Voltage with Respect to GND |
0.5 to VCC +0.5 |
V |
| TSTG | Storage Temperature |
65 to +150 |
|
| IOUT | DC Output Current |
60 to +120 |
mA |
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
2. All device terminals except FCT162XXXT Output and I/O terminals.
3. Output and I/O terminals for FCT162XXXT.
IDT54FCT16373T Features
• Common features:
0.5 MICRON CMOS Technology
High-speed, low-power CMOS replacement for ABT functions
Typical tSK(o) (Output Skew) < 250ps
Low input and output leakage 1A (max.)
ESD > 2000V per MIL-STD-883, Method 3015;> 200V using machine model (C = 200pF, R = 0)
Packages include 25 mil pitch SSOP, 19.6 mil pitch
TSSOP,15.7 mil pitch TVSOP and 25 mil pitch Cerpack
Extended commercial range of -40°C to +85°C
VCC = 5V ±10%
• Features for FCT16373T/AT/CT/ET:
High drive outputs (-32mA IOH, 64mA IOL)
Power off disable outputs permit "live insertion"
Typical VOLP (Output Ground Bounce) < 1.0V at VCC = 5V, TA = 25°C
• Features for FCT162373T/AT/CT/ET:
Balanced Output Drivers: ±24mA (commercial),±16mA (military)
Reduced system switching noise
Typical VOLP (Output Ground Bounce) < 0.6V at VCC = 5V,TA = 25°C
0.5 MICRON CMOS Technology
High-speed, low-power CMOS replacement for ABT functions
Typical tSK(o) (Output Skew) < 250ps
Low input and output leakage 1A (max.)
ESD > 2000V per MIL-STD-883, Method 3015;> 200V using machine model (C = 200pF, R = 0)
Packages include 25 mil pitch SSOP, 19.6 mil pitch
TSSOP,15.7 mil pitch TVSOP and 25 mil pitch Cerpack
Extended commercial range of -40°C to +85°C
VCC = 5V ±10%
• Features for FCT16373T/AT/CT/ET:
High drive outputs (-32mA IOH, 64mA IOL)
Power off disable outputs permit "live insertion"
Typical VOLP (Output Ground Bounce) < 1.0V at VCC = 5V, TA = 25°C
• Features for FCT162373T/AT/CT/ET:
Balanced Output Drivers: ±24mA (commercial),±16mA (military)
Reduced system switching noise
Typical VOLP (Output Ground Bounce) < 0.6V at VCC = 5V,TA = 25°C
IDT54FCT16373T Connection Diagram
IDT 79R3081
PDF/DataSheet Download
- Datasheet: IDT 79R3081
- File Size: 914564 KB
- Manufacturer: IDT
- Click here to Download
- ·IDT 79R3081E
- IDT
- RISController?
- 914564 KB
- ·IDT 79RV3081
- IDT
- RISController?
- 914564 KB
- ·IDT 79RV3081E
- IDT
- RISController?
- 914564 KB
- ·IDT RC5000
- IDT
- MULTI-ISSUE 64-BIT MICROPROCESSOR
- 470729 KB
- ·IDT2305
- IDT [Integrated Device Technology]
- 3.3V ZERO DELAY CLOCK BUFFER
- 135648 KB
- ·IDT2305-1
- IDT [Integrated Device Technology]
- 3.3V ZERO DELAY CLOCK BUFFER
- 135648 KB
- ·IDT2305-1DC
- IDT [Integrated Device Technology]
- 3.3V ZERO DELAY CLOCK BUFFER
- 135648 KB
- ·IDT2305-1DCG
- IDT [Integrated Device Technology]
- 3.3V ZERO DELAY CLOCK BUFFER
- 135648 KB
IDT54FCT16373T Relative Products
IDT54FCT16373ET
The IDT54FCT16373ET 16-bit transparent D-type latches are built using advanced dual metal CMOS technology. These high-speed, low-power latches are ideal for temporary storage of data. They can be used for implementing memory address latches, I/O ports, and b...
IDT54FCT16373AT
The IDT54FCT16373AT 16-bit transparent D-type latches are built using advanced dual metal CMOS technology. These high-speed, low-power latches are ideal for temporary storage of data. They can be used for implementing memory address latches, I/O ports, and b...
IDT54FCT162H501ET
The IDT54FCT162H501ET 18-bit registered transceivers are built using advanced dual metal CMOS technology. These high-speed, low-power 18-bit registered bus transceivers combine D-type latches and D-type flip-flops to allow data flow in transparent, latched a...
IDT54FCT162H501CT
The IDT54FCT162H501CT 18-bit registered transceivers are built using advanced dual metal CMOS technology. These high-speed, low-power 18-bit registered bus transceivers combine D-type latches and D-type flip-flops to allow data flow in transparent, latched a...
IDT54FCT162H501AT
The IDT54FCT162H501AT 18-bit registered transceivers are built using advanced dual metal CMOS technology. These high-speed, low-power 18-bit registered bus transceivers combine D-type latches and D-type flip-flops to allow data flow in transparent, latched a...
IDT54FCT162841ET
The IDT54FCT162841ET 20-bit transparent D-type latches are built using advanced dual metal CMOS technology. These high-speed, low-power latches are ideal for temporary storage of data. They can be used for implementing memory address latches, I/O ports,and b...
Hotspot Suppliers Product
T495D337M010ATE150
Price: 0.99-2.99 USD
solid tantalum chip capacitor, SMD/SMT, 330uF 10V, 150 mOhms, T495D337M010ATE150
OZ9939GN
Price: 0.94-1.25 USD
Smart Multi-DIMM Selector, SOP16, -0.3 to 5.5 V, ±25 mA
AD9851BRS
Price: 7.5-8 USD
highly integrated device, SSOP28, 30 mA, +2.7 V to +5.25 V, 180 MHz Clock Rate, Low Power, Power-D...
TLC556CDRG4
Price: 0.25-0.45 USD
monolithic timing circuit, SOP14, 18V, 150mA, Very Low Power Consumption, High Output-Current Capa...
G5NB-1A-DC12V
Price: 0.5-0.8 USD
PCB Relay, Low power consumption, RoHS Compliant, 40.0 mA Rated current, 125 Ω Coil resistance
BC847S E6327
Price: 0.03-0.032 USD
NPN Silicon AF Transistor Array, 45V Collector-emitter voltage, SOT-363, collector current 100 mA
HCF4027BE
Price: 0.4-1 USD
integrated circuit, DIP, –0.5 to + 18V
SPP20N60C3
Price: 0.6-3 USD
TO-220, power transistor, 650V
BYT87-1000
Price: 0.24-0.38 USD
Ultra Fast Recovery Silicon Power Rectifier, TO220, 1000V, 100A, High voltage, High current
SN74AVC16835DGGR
Price: 0.5-0.8 USD
18-Bit Universal Bus Driver, 3-State Outputs, 56-TSSOP
AQV215
Price: 0.1-100 USD
GU PhotoMOS RELAY, OPTO AC/DC, 320MA, 6DIP, 60V to 600V, Controls low-level analog signal
K6T0808C1D-DB55
Price: 0.65-0.85 USD
DIP, 32Kx8 bit, low power, CMOS static RAM, battery backup operation, low data retention current, ...
