Purchase MK1709, In-stock MK1709 From SeekIC.


Part Number: MK1709
Description: The MK1709 generates a low EMI output clock from a clock input. The part is designed to dither the LCD...


Description: The MK1709 generates a low EMI output clock from a clock input. The part is designed to dither the LCD...
The MK1709 generates a low EMI output clock from a clock input. The part is designed to dither the LCD interface clock for flat panel graphics controllers. The device uses ICS' proprietary mix of analog and digital Phase Locked Loop (PLL) technology to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB.
The MK1709 offers centered spread from a high speed clock input. Refer to the MK1714-01/02 for a crystal input and the widest selection of input frequencies and multipliers.
ICS offers many other clocks for computers and computer peripherals. Consult us when you need to remove crystals and oscillators from your board.
Stresses above the ratings listed below can cause permanent damage to the MK1709. These ratings, which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. Typical values are at 25°C.
|
Item |
Rating |
| Supply Voltage, VDD(referenced to GND) | 5V |
| All Inputs and Outputs(referenced to GND) | -0.5 V to VDD+0.5 V |
| Ambient Operating Temperature | 0 to +85 |
| Storage Temperature | -65 to +150 |
| Soldering Temperature(maximum of 10 seconds) | 260 |
MK1709
PDF/DataSheet Download








