Purchase MX29LV160CT, In-stock MX29LV160CT From SeekIC.
Part Number: MX29LV160CT
Description: The MX29LV160C T/B is a 16-mega bit Flash memory organized as 2M bytes of 8 bits or 1M words of 16 bit...
- Table of contents:
MX29LV160CT
-
Suppliers
DataSheet
General Description
MX29LV160CT General Description
The MX29LV160C T/B is a 16-mega bit Flash memory organized as 2M bytes of 8 bits or 1M words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV160C T/B is packaged in 44-pin SOP, 48-pin TSOP and 48-ball CSP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.
The standard MX29LV160C T/B offers access time as fast as 55ns, allowing operation of high-speed microprocessors without wait states. To eliminate bus contention, the MX29LV160C T/B has separate chip enable (CE#) and output enable (OE#) controls.
MXIC's Flash memories augment EPROM functionality with in-circuit electrical erasure and programming. The MX29LV160C T/B uses a command register to manage this functionality. The command register allows for 100% TTL level control inputs and fixed power supply levels during erase and programming, while maintaining maximum EPROM compatibility.
MXIC Flash technology reliably stores memory contents even after 100,000 erase and program cycles. The MXIC cell is designed to optimize the erase and programming mechanisms. In addition, the combination of advanced tunnel oxide processing and low internal electric fields for erase and program operations produces reliable cycling. The MX29LV160C T/B uses a 2.7V~3.6V VCC supply to perform the High Reliability Erase and auto Program/Erase algorithms.
The highest degree of latch-up protection is achieved with MXIC's proprietary non-epi process. Latch-up protection is proved for stresses up to 100 milliamps on address and data pin from -1V to VCC + 1V.
MX29LV160CT Maximum Ratings
Storage Temperature
Plastic Packages . . . . . . . . . . . . .... -65 to +150
Ambient Temperature
with Power Applied. . . . . . . . . . ..... -65 to +125
Voltage with Respect to Ground
VCC (Note 1) . . . . . . . . . . . . . . . . . -0.5 V to +4.0 V
A9, OE#, and
RESET# (Note 2) . . . . . . . . . . . ....-0.5 V to +12.5 V
All other pins (Note 1) . . . . . .. -0.5 V to VCC +0.5 V
Output Short Circuit Current (Note 3) . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is -0.5 V. During voltage transitions, input or I/O pins may overshoot VSS to -2.0 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is VCC +0.5 V. During voltage transitions, input or I/O pins may overshoot to VCC +2.0 V for periods up to 20 ns.
2. Minimum DC input voltage on pins A9, OE#, and RESET# is -0.5 V. During voltage transitions, A9, OE#, and RESET# may overshoot VSS to -2.0 V for periods of up to 20 ns. Maximum DC input voltage on pin A9 is +12.5 V which may overshoot to 14.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
MX29LV160CT Features
• Extended single - supply voltage range 2.7V to 3.6V
• 2,097,152 x 8/1,048,576 x 16 switchable
• Single power supply operation
- 3.0V only operation for read, erase and program operation
• Fully compatible with MX29LV160B device
• Fast access time: 55R/70/90ns
• Low power consumption
- 30mA maximum active current
- 0.2uA typical standby current
• Command register architecture
- Byte/word Programming (9us/11us typical)
- Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x31)
• Auto Erase (chip & sector) and Auto Program
- Automatically erase any combination of sectors with Erase Suspend capability.
- Automatically program and verify data at specified address
• Erase Suspend/Erase Resume
- Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase.
• Status Reply
- Data# Polling & Toggle bit for detection of program and erase operation completion.
• Ready/Busy# pin (RY/BY#)
- Provides a hardware method of detecting program or erase operation completion.
• Sector protection
- Hardware method to disable any combination of sectors from program or erase operations
- Temporary sector unprotect allows code changes in previously locked sectors.
• CFI (Common Flash Interface) compliant
- Flash device parameters stored on the device and provide the host system to access
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Boot Sector Architecture
- T = Top Boot Sector
- B = Bottom Boot Sector
• Low VCC write inhibit is equal to or less than 1.4V
• Package type:
- 44-pin SOP
- 48-pin TSOP
- 48-ball CSP
- All Pb-free devices are RoHS Compliant
• Compatibility with JEDEC standard
- Pinout and software compatible with single-power supply Flash
• 10 years data retention
MX29LV160CT Connection Diagram
MX205Q
PDF/DataSheet Download
- Datasheet: MX205Q
- File Size: 252911 KB
- Manufacturer: ETC [ETC]
- Click here to Download
- ·MX205QC
- ETC [ETC]
- Low Cost, 5.0g, Dual Axis Accelerometer with Analog Outputs
- 252911 KB
- ·MX205QL
- ETC [ETC]
- Low Cost, 5.0g, Dual Axis Accelerometer with Analog Outputs
- 252911 KB
- ·MX210Q
- ETC [ETC]
- Low Cost, 10g, Dual Axis Accelerometer with Analog Outputs
- 252922 KB
- ·MX210QC
- ETC [ETC]
- Low Cost, 10g, Dual Axis Accelerometer with Analog Outputs
- 252922 KB
- ·MX210QL
- ETC [ETC]
- Low Cost, 10g, Dual Axis Accelerometer with Analog Outputs
- 252922 KB
- ·MX214
- CMLMICRO [CML Microcircuits]
- Variable Split Band Inverter
- 238010 KB
- ·MX23C1010
- MCNIX [Macronix International]
- 1M-BIT MASK ROM (8 BIT OUTPUT)
- 119262 KB
- ·MX23C1010MC-10
- MCNIX [Macronix International]
- 1M-BIT MASK ROM (8 BIT OUTPUT)
- 119262 KB
MX29LV160CT Relative Products
MX29LV160BT
The MX29LV160BT/BB is a 16-mega bit Flash memory organized as 2M bytes of 8 bits or 1M words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV160BT/BB is packaged in 44-pin S...
MX29LV160BB
The MX29LV160BT/MX29LV160BB is a 16-mega bit Flash memory organized as 2M bytes of 8 bits or 1M words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV160BT/BB is packaged in...
MX29LV128D T
The block diagram on Page 4 illustrates a simplified architecture of MX29LV128D T/B. Each block in the block diagram represents one or more circuit modules in the real chip used to access, erase, program, and read the memory array.The "CONTROL INPUT LOGIC" b...
MX29LV081
The MX29LV081 is a 8-mega bit Flash memory organized as 1M bytes of 8 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV081 is packaged in 40-pin TSOP. It is designed to be reprogra...
MX29LV040QC-70
The MX29LV040QC-70 is a 4-mega bit Flash memory organized as 512K bytes of 8 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory. The MX29LV040QC-70 is packaged in 32-pin PLCC and TSOP. It is des...
MX29LV040QC-55
The MX29LV040QC-55 is a 4-mega bit Flash memory organized as 512K bytes of 8 bits. The features of MX29LV040QC-55 are: (1)Extended single - supply voltage range 2.7V to 3.6V; (2)524,288 x 8 only; (3)Single power supply operation: 5.0V only operation for read...
Hotspot Suppliers Product
MC33274ADR2G
Price: 0.5-0.6 USD
monolithic operational amplifiers, innovative Bipolar design concepts, patented Zip−R&am...
AM29F010B-70JC
Price: 2-2.5 USD
PLCC32, 5.0 Volt-only, Flash memory
CM400DU-12F
Price: 10-90 USD
IGBT modules, DUAL 600V Collector-emitter voltage, 400A Collector current, NF SER, Insulated Type
TL500CJ
Price: 8-8.5 USD
digitla processor, 18V, 10mA, true differential inputs, high input impedance, automatic zero, auto...
AD574AJN
Price: 15-20 USD
DIP28, complete 12-Bit A/D converter, 16.5 V, 825 mW, 16-Bit Microprocessor
2MBI150UB-120
Price: 1-1 USD
IGBT Module, Voltage drive, 1200 V
FS75R12KT3
Price: 20-50 USD
FS75R12KT3, EmCon High Efficiency diode, Infineon Technologies, 1200V, 75 to 105A
HPD-60
Price: 7.9-9.5 USD
Car audio PUH, Sharp Electrionic Components, HPD-60
ADS1210U
Price: 1-4 USD
24-Bit analog-to-digital converter, differential inputs, programmable gain amplifier, SOP18
MRF235
Price: 18-20 USD
NPN SILICON RF POWER TRANSISTOR MRF235
TLP521-1
Price: 0.01-10 USD
Programmable Controllers, AC/DC-Input Module, Solid State Relay, DIP-4, 70mA Forward current
MAX323CSA
Price: 0.4-0.7 USD
precision, dual, SPST analog switch, 8SOIC, -0.3V to +17V, Low On-Resistance
