Features: · 6- to 16.5-V Input Range (Si9150CY)· Voltage-Mode PWM Control· Low-Current Standby Mode· Enable Control· Dual 100-mA Output Drivers· 2% Band Gap Reference· Multiple Converters Easily Synchronized· Over-Current ProtectionPinoutSpecificationsVoltages Referenced to GND.VDD . . . . . . . ....
Si9150: Features: · 6- to 16.5-V Input Range (Si9150CY)· Voltage-Mode PWM Control· Low-Current Standby Mode· Enable Control· Dual 100-mA Output Drivers· 2% Band Gap Reference· Multiple Converters Easily Syn...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.84 - 2.87 / Piece
Switching Converters, Regulators & Controllers 3W HV Switchmode Reg
US $1.21 - 1.46 / Piece
Switching Converters, Regulators & Controllers 3W HV Switchmode Reg

The Si9150 synchronous buck regulator controller is ideally suited for high-efficiency step down converters in battery-powered equipment. Combined with the Si9943DY MOSFET half-bridge, a 90% efficient, 7.5-W, 3.3-V or 5-V power supply can be implemented using standard surfacemount assembly techniques. The wide input range allows operation from NiCd or NiMH battery packs using six to ten cells.
Over-current protection is achieved by sensing the on-state voltage drop across the high side p-channel MOSFET, which eliminates the need for a current sense resistor.
Duty ratios of 0 to 100% and switching frequencies up to 300 kHz are possible. The IC can be disabled by pulling EN low (IDD = 100 A), or the 2.5-V reference can be maintained, with all other functions disabled, by pulling STBY low (IDD = 500 A).
The Si9150 is available in both standard and lead (Pb)-free 14-pin SOIC and rated for the commercial temperature range of 0 to 70 (C suffix), and the industrial temperature range of −40 to +85 (D suffix).